Plates and panels
Server Rack Cabinet 600x1080
- Bounding box
- 600 × 600 × 1080 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D metal server rack cabinet. All dimensions are in millimeters (mm). **Overall dimensions:** - Width: 600 mm - Height: 1080 mm - Depth: Unknown **Front and rear panels:** - Both sides have perforated metal panels. - Panel height: 770 mm. - Left border: 40 mm. - Right border: 40 mm. - Perforated area width: 520 mm. - Front and rear panels must have identical dimensions. **Vertical clearances:** - Top gap: 40 mm. - Bottom gap: 40 mm. **Base:** - Width: 600 mm. **Side:** - One side has a removable door. - Two 140 mm measurements were provided from opposite directions on the same side. - Exact door geometry is not confirmed. **Important:** - Use accurate dimensions. - Keep the frame, base, front panel, rear panel and door as separate components. - Do not invent the unknown depth, door dimensions, hole diameter or hole spacing. - Create a simple rectangular metal rack cabinet. - Prioritize dimensional accuracy over appearance.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall rack width | 600 mm | 300 – 1200 |
| Overall rack height | 1080 mm | 500 – 2000 |
| Overall depth - UNCONFIRMED, editable | 600 mm | 300 – 1200 |
| Frame member square section | 40 mm | 20 – 100 |
| Bottom base height | 150 mm | 40 – 400 |
| Perforated panel height | 770 mm | 200 – 1500 |
| Panel left/right border width | 40 mm | 10 – 150 |
| Effective perforated width | 520 mm | 100 – 1000 |
| Top door gap | 40 mm | 5 – 200 |
| Bottom door gap | 40 mm | 5 – 200 |
| Front/rear panel thickness | 8 mm | 3 – 20 |
| Door front/rear border width - UNCONFIRMED | 140 mm | 20 – 280 |
| Side door thickness | 8 mm | 3 – 20 |
| Hole diameter - UNCONFIRMED | 10 mm | 3 – 30 |
| Hole pitch - UNCONFIRMED | 24 mm | 8 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Modular Commercial Kiosk Container
A modern modular commercial kiosk container, 4.5m in width, 2.5m in depth, and 3.35m in total height. The main body is a hollow rectangular prism with a wall, floor, and roof thick
Electric Control Panel 1m
I want an electric panel 1m by 1m with green start and red stop bottom