Brackets and mounts
Sensor Pod Housing
- Bounding box
- 110.0 × 55.0 × 38.8 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D printable sensor pod housing for an Arduino monitoring system. Overall outer dimensions: 80mm length, 55mm width, 40mm height, with 2.5mm uniform wall thickness and a removable top lid. Internal Standoffs: - Four vertical cylindrical mounting posts on the bottom inside floor, each 5mm diameter and 4mm high, with a 2mm central screw pilot hole, spaced to support an internal microcontroller board. Apertures and Cutouts: - Front face: Three inline circular through-holes, each 5.2mm in diameter, centered vertically and spaced 10mm apart for status LEDs. - Left side face: One circular through-hole, 12.2mm in diameter, for a piezo buzzer grill. - Right side face: One rectangular cutout slot, 15mm wide by 3.5mm high, positioned near the top rim for SD card module access. External Mounting Features: - Two mounting tabs extending horizontally from opposite ends of the bottom outer base plate. Each tab is 20mm wide, 15mm long, and 3mm thick, featuring a central 20mm x 3mm rectangular slot to fit mounting straps or hose clamps.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 80 mm | 60 – 120 |
| Width | 55 mm | 40 – 80 |
| Height | 40 mm | 30 – 60 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| Standoff Diameter | 5 mm | 3 – 8 |
| Standoff Height | 4 mm | 2 – 8 |
| Screw Pilot Diameter | 2 mm | 1 – 3 |
| LED Hole Diameter | 5.2 mm | 3 – 8 |
| LED Spacing | 10 mm | 5 – 20 |
| Buzzer Hole Diameter | 12.2 mm | 8 – 20 |
| SD Slot Width | 15 mm | 10 – 25 |
| SD Slot Height | 3.5 mm | 2 – 6 |
| Tab Width | 20 mm | 10 – 30 |
| Tab Length | 15 mm | 10 – 25 |
| Tab Thickness | 3 mm | 2 – 5 |
| Tab Slot Width | 3 mm | 2 – 5 |
| Tab Slot Length | 20 mm | 10 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent