Everything else
Semi-Submersible Platform (OC5 DeepCwind)
- Bounding box
- 69745.6 × 62005.2 × 30801.7 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a semi-submersible floating offshore wind platform (NREL OC5 DeepCwind). The platform consists of: 1 central column: diameter 6.5m, height 30m, positioned at origin (0, 0) 3 offset columns: diameter 12m, height 26m, positioned at: Column 1: X = 28.87m, Y = -16.67m Column 2: X = -28.87m, Y = -16.67m Column 3: X = 0m, Y = 33.33m All columns sit with their base at -20m (20m draft below waterline). Upper pontoons: diameter 1.6m, horizontal tubes connecting the central column to each offset column at 16m below waterline. Lower pontoons: diameter 1.6m, horizontal tubes connecting the three offset columns to each other at base level (-20m). Cross braces: diameter 1.2m, diagonal tubes connecting the upper and lower connection points between columns. No turbine or tower required - platform only."
Parameters
| Name | Value | Range |
|---|---|---|
| Central Column Diameter | 6500 mm | 500 – 20000 |
| Central Column Height | 30000 mm | 5000 – 100000 |
| Offset Column Diameter | 12000 mm | 500 – 30000 |
| Offset Column Height | 26000 mm | 5000 – 100000 |
| Base Z (draft level) | -20000 mm | -100000 – 0 |
| Upper Pontoon Z | -16000 mm | -100000 – 0 |
| Offset Col 1 X | 28870 mm | -100000 – 100000 |
| Offset Col 1 Y | -16670 mm | -100000 – 100000 |
| Offset Col 2 X | -28870 mm | -100000 – 100000 |
| Offset Col 2 Y | -16670 mm | -100000 – 100000 |
| Offset Col 3 X | 0 mm | -100000 – 100000 |
| Offset Col 3 Y | 33330 mm | -100000 – 100000 |
| Pontoon Diameter | 1600 mm | 100 – 5000 |
| Cross Brace Diameter | 1200 mm | 100 – 5000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm