Everything else
Semi-Cylindrical Collector Mesh with Ionizer Wire
- Bounding box
- 84.0 × 42.5 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
my design is to use a thin wire form where the electrons will be emitted and the mesh which will be in shape of a rectangle an bend in a semi circular/ cylinderical form. and the wire will be at the focal point . but i first want to make a 3d simulation which will check the aerodynamics of the fog moving through the mesh and even test different shape of the collector mesh
Parameters
| Name | Value | Range |
|---|---|---|
| Collector inner radius | 40 mm | 10 – 200 |
| Mesh thickness | 2 mm | 0.5 – 8 |
| Collector depth (along wire) | 60 mm | 10 – 300 |
| Mesh arc angle | 180 deg | 90 – 180 |
| Wire electrode diameter | 1 mm | 0.2 – 4 |
| Number of axial slots | 8 count | 2 – 24 |
| Slot width | 2 mm | 0.5 – 15 |
| Slot end margin | 8 mm | 0 – 10 |
| Support spoke radius | 1.5 mm | 0.25 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm