Brackets and mounts
Secure Phone Enclosure (Rear Plate + Front Bezel)
- Bounding box
- 204.0 × 182.0 × 16.5 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- August 27, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model; do not start over. Keep these dimensions unchanged: * phone: 159.2 × 73.5 × 7.9 mm * enclosure: 182 × 92 mm * rear plate: 4 mm * wall thickness: 3.5 mm * cavity depth: 9 mm * USB cutout: 13 × 7 mm * M3 screw hole: 3.2 mm * screw recess: 6 mm diameter × 2 mm deep * corner chamfer: 3 mm Make these changes: 1. Keep the phone cavity generous enough for a first-print fit, but do not exceed about 1 mm total clearance in width or height unless required. 2. Redesign the front bezel so it has: * a dedicated top branding area above the screen * a dedicated bottom area below the screen for CHECK-IN text * four clean recessed security screw locations, one near each outer corner * a more premium rugged commercial-kiosk appearance 3. Remove the separate circular camera cutout if the main screen opening already exposes the upper-left front camera. The camera must remain unobstructed. 4. Keep the screen opening approximately 68 × 150 mm unless changing it is necessary to expose the full usable display. 5. Add a flat centered logo panel above the screen sized for importing an external Super Singh Fitness SVG later. Do not generate the logo. 6. Add recessed or raised CHECK-IN text centered below the screen. 7. Improve the rear plate by adding: * four concealed wall-mounting holes * four narrow ventilation slots * a concealed USB-C cable channel from the phone bottom to the lower rear * basic cable strain relief 8. Do not expose power, volume, SIM tray, headphone jack, speaker or microphone areas. 9. Keep the enclosure slim and close to the existing 182 × 92 mm footprint. 10. Keep rear plate and front bezel as two separate printable parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Phone Height | 159.2 mm | 100 – 200 |
| Phone Width | 73.5 mm | 50 – 100 |
| Phone Thickness | 7.9 mm | 5 – 15 |
| Cavity Tolerance | 0.5 mm | 0.1 – 2 |
| Rear Plate Thickness | 4 mm | 2 – 8 |
| Wall Thickness | 3.5 mm | 2 – 6 |
| Enclosure Height | 182 mm | 150 – 220 |
| Enclosure Width | 92 mm | 70 – 120 |
| Cavity Depth | 9 mm | 6 – 15 |
| Vent Slot Width | 3 mm | 1 – 6 |
| Vent Slot Length | 20 mm | 5 – 50 |
| Vent Slot Count | 4 count | 2 – 8 |
| Mount Hole Diameter | 5 mm | 3 – 10 |
| Mount Hole Offset | 10 mm | 5 – 20 |
| Screw Hole Diameter | 3.2 mm | 2 – 6 |
| Screw Recess Diameter | 6 mm | 4 – 10 |
| Screw Recess Depth | 2 mm | 1 – 4 |
| Screw Offset | 10 mm | 5 – 20 |
| Bezel Wall Thickness | 3.5 mm | 2 – 6 |
| Bezel Depth | 10 mm | 5 – 20 |
| Screen Opening Width | 68 mm | 50 – 80 |
| Screen Opening Height | 150 mm | 120 – 170 |
| USB Cutout Width | 13 mm | 8 – 20 |
| USB Cutout Height | 7 mm | 4 – 12 |
| Corner Chamfer | 3 mm | 1 – 6 |
| Layout Gap | 20 mm | 5 – 50 |
| Logo Panel Width | 40 mm | 20 – 70 |
| Logo Panel Height | 15 mm | 5 – 30 |
| Check-in Text Width | 30 mm | 10 – 60 |
| Check-in Text Height | 8 mm | 3 – 15 |
| Cable Channel Width | 8 mm | 5 – 15 |
| Cable Channel Depth | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent