Everything else
Sealed SIM Adapter Enclosure
- Bounding box
- 81.3 × 57.5 × 36.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
加装独立密封SIM卡转接套件：使用外置密封SIM卡转接延长组件，把 SIM卡移到独立密封防爆小盒内；主设备内部水汽、凝露不会直接侵蚀卡片。转接线束穿过防爆格兰头，保持防爆要求。选用带透气防水阀的防爆壳体，平衡内外压力，减少凝露；线缆、转接接头全部采用防水防爆格兰头，防止融雪水、雨水渗入。这样将sim卡独立出来，可以在日常生产中减少sim卡损伤机会，降低更换频率，提升使用寿命，保证RTU稳定上线。
Parameters
| Name | Value | Range |
|---|---|---|
| Box width | 60 mm | 40 – 100 |
| Box depth | 46 mm | 30 – 80 |
| Box height | 34 mm | 20 – 60 |
| Wall thickness | 2.5 mm | 1.2 – 5 |
| Corner radius | 5 mm | 1 – 12 |
| Lid plate thickness | 3 mm | 2 – 6 |
| Lid screw clearance dia | 3.4 mm | 2 – 6 |
| Corner screw boss dia | 7 mm | 4 – 12 |
| Cable gland thread hole dia | 12.2 mm | 8 – 20 |
| Breather valve thread hole dia | 12.2 mm | 8 – 20 |
| Port centre height above base | 15 mm | 8 – 30 |
| Mounting flange depth | 12 mm | 6 – 25 |
| Mounting flange thickness | 5 mm | 3 – 10 |
| Wall mounting hole dia | 4.5 mm | 3 – 8 |
| Wall mounting hole spacing | 36 mm | 20 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm