Enclosures and housings
Sealed Battery Immersion Enclosure with Cell Array
- Bounding box
- 602.0 × 402.0 × 166.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wall thickness. Inside the cavity, place an array of 150 cylindrical battery cells in a 10 by 15 grid pattern. Each cell is 33mm in diameter and 140mm in height, spaced with a uniform 2mm gap between adjacent cell walls (35mm center-to-center pitch). Include a 15mm perimeter flange at the top opening with 16 M6 clearance bolt holes and a 2mm O-ring seal groove. Include two 1-inch NPT threaded port bosses on opposite ends for dielectric fluid entry and exit.
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity Length | 540 mm | 300 – 900 |
| Cavity Width | 360 mm | 200 – 700 |
| Cavity Height | 160 mm | 80 – 300 |
| Wall Thickness | 6 mm | 2 – 20 |
| Flange Width | 15 mm | 5 – 50 |
| Flange Thickness | 10 mm | 4 – 30 |
| Bolt Hole Diameter | 6.5 mm | 3 – 12 |
| Bolt Count | 16 | 4 – 32 |
| O-ring Groove Width | 2 mm | 0.5 – 5 |
| O-ring Groove Depth | 1.5 mm | 0.2 – 4 |
| O-ring Center Offset | 3 mm | 1 – 10 |
| Port Boss Diameter | 50 mm | 36 – 80 |
| Port Boss Height | 25 mm | 10 – 60 |
| Port Hole Diameter | 32.5 mm | 20 – 45 |
| Port Center Z | 86 mm | 20 – 200 |
| Cell Diameter | 33 mm | 20 – 80 |
| Cell Height | 140 mm | 50 – 250 |
| Cell Pitch X | 35 mm | 25 – 100 |
| Cell Pitch Y | 35 mm | 25 – 100 |
| Cell Count X | 15 | 1 – 30 |
| Cell Count Y | 10 | 1 – 30 |
| Cell Bottom Embed | 2 mm | 0.5 – 4.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w