Scrub Daddy Sponge Holder (Simplified)

I designed this in meshy ai but it not done. It is a holder for a scrub daddy sponge. These are the dimensions of the sponge. Create a 3D-printable countertop holder for a standard Original Scrub Daddy round sponge. Design requirements: * Sponge size: approximately 102 mm diameter x 38 mm thick. * Make the interior cavity 107 mm diameter x 43 mm deep to provide a small amount of clearance. * Use 3 mm thick walls. * Make the bottom 3 mm thick. * Create a flat, stable base. * Add multiple drainage holes in the bottom, approximately 6 mm diameter, arranged evenly so water can drain from the sponge. * Raise the sponge slightly above the bottom using several small support ribs or feet inside the holder so the sponge does not sit directly in water. * Add a large, simple Scrub Daddy-style smiling face design on the front of the holder. * Make the smiley face raised approximately 1.5 mm from the front surface rather than cutting completely through the wall. * Keep the design rounded and smooth with no sharp exterior corners. * Make the holder completely printable without supports. * Keep the bottom flat against the build plate. * Make the design suitable for FDM 3D printing with PLA or PLA+. * Do not make the design overly detailed. * Ensure the final model is a single solid, manifold, watertight CAD body suitable for exporting as STL or 3MF. * Overall goal: a cute, functional Scrub Daddy sponge holder that allows the sponge to drain and dry while sitting securely on a kitchen counter.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.