Brackets and mounts
Scale Enclosure Assembly
- Bounding box
- 200.0 × 150.0 × 75.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
3D printable two-part electronic enclosure for a digital scale. Wall thickness is 3mm for high durability. The top cover has a rectangular cutout for a 20x4 LCD display. Below the display, add 3 circular holes for tactile buttons with a 12mm diameter, and 1 rectangular cutout for a standard rocker switch. Inside the bottom half of the enclosure, leave a large empty volume to house a standard breadboard and internal wiring securely. At the base of the bottom half, create a recessed battery compartment that is completely flush with the external surface, and include a separate snap-fit printable cover with retaining clips for this battery bay. Include four M3 screw bosses in the interior corners to securely close the top and bottom halves.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Width | 200 mm | 100 – 400 |
| Enclosure Length | 150 mm | 80 – 300 |
| Wall Thickness | 3 mm | 1.5 – 6 |
| Top Cover Height | 25 mm | 10 – 50 |
| Bottom Height | 50 mm | 30 – 100 |
| Screw Hole Diameter (top) | 3.2 mm | 2.5 – 5 |
| Boss Outer Diameter | 8 mm | 5 – 12 |
| Boss Hole Diameter | 2.5 mm | 1.5 – 4 |
| Boss Height | 10 mm | 5 – 20 |
| Boss Center Offset from Corner | 10 mm | 5 – 30 |
| LCD Cutout Width | 98 mm | 50 – 150 |
| LCD Cutout Height | 38 mm | 20 – 80 |
| Display Top Edge Offset | 20 mm | 5 – 50 |
| Button Hole Diameter | 12 mm | 6 – 20 |
| Button Spacing | 20 mm | 10 – 50 |
| Number of Buttons | 3 | 1 – 5 |
| Buttons Gap Below Display | 15 mm | 5 – 40 |
| Rocker Cutout Width | 21 mm | 15 – 30 |
| Rocker Cutout Height | 13 mm | 8 – 20 |
| Rocker Gap Below Buttons | 10 mm | 5 – 40 |
| Battery Compartment Width | 80 mm | 40 – 120 |
| Battery Compartment Length | 40 mm | 20 – 80 |
| Battery Compartment Depth | 20 mm | 10 – 40 |
| Battery Cover Thickness | 5 mm | 2 – 10 |
| Retaining Lip Width | 2 mm | 0.5 – 5 |
| Retaining Lip Height | 2 mm | 0.5 – 5 |
| Snap Tab Width | 10 mm | 4 – 20 |
| Snap Tab Protrusion | 1.5 mm | 0.5 – 5 |
| Snap Tab Thickness | 2 mm | 0.5 – 5 |
| Tab Distance from Bottom | 1 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl
