Gears and transmission
Samsung Galaxy S23 TPU Case with Slam Jam Logo Cutout
- Bounding box
- 150.3 × 74.9 × 9.7 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create an editable, dimensionally accurate 3D-printable protective case for the Samsung Galaxy S23 base model (SM-S911B), featuring a large circular Slam Jam logo (from the uploaded reference image) cut completely through the back panel. 1. Geometry Full case with protective side walls, rounded corners and a back panel of about 1.8–2.0 mm. Use verified device dimensions and position the openings for cameras, flash, side buttons, USB-C, speaker and microphone accurately. Do not invent critical measurements: use verified CAD geometry or ask for missing ones. Include manufacturing tolerances suited to the print material. 2. Logo as a cutout Reproduce the reference logo faithfully (proportions, circular outline, internal shapes, line thicknesses and original gaps), centred on the back panel. Boolean-subtract only the white areas of the logo from the back panel, creating genuine through-holes: the phone’s back must be visible through every hole. Black areas stay solid case material: do not cut out the whole circular background. No inserts, backing plates, transparent material or fill behind the holes. Do not simplify the silhouette. 3. Structure and manufacturing Check the remaining material around the logo, camera openings and edges. If the exact geometry compromises strength, propose the smallest structural adjustments that keep the logo recognisable. Optimise for FDM printing, preferably in TPU. Geometry must be watertight, manifold and free of self-intersections. All units in millimetres. 4. Deliverables Editable 3D CAD model (not a render), an STL file ready for slicing and, if possible, a STEP file. A 3D preview to inspect the logo cutouts. Confirmation that the holes are true Boolean cuts with no material behind them. A list of dimensions and fit requirements that need physical verification before printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Phone length | 146.3 mm | 130 – 170 |
| Phone width | 70.9 mm | 60 – 90 |
| Phone depth | 7.6 mm | 5 – 15 |
| Back panel thickness | 1.9 mm | 1.5 – 2.5 |
| Side wall thickness | 2 mm | 1 – 4 |
| Outer corner radius | 10 mm | 5 – 20 |
| XY fit clearance | 0.2 mm | 0 – 1 |
| Z fit clearance | 0.2 mm | 0 – 1 |
| Logo outer diameter | 50 mm | 20 – 80 |
| Logo ring width | 2.5 mm | 0.5 – 6 |
| Logo slot width | 3 mm | 0.5 – 10 |
| Logo slot length | 14 mm | 4 – 40 |
| Logo slot count | 6 | 0 – 12 |
| Logo slot center radius | 15 mm | 5 – 35 |
| Logo center hole diameter | 8 mm | 0 – 40 |
| Logo ring gap width | 3 mm | 0.5 – 10 |
| Camera offset from top | 18 mm | 5 – 30 |
| Camera offset from left | 14 mm | 5 – 25 |
| Camera lens diameter | 9 mm | 3 – 15 |
| Camera lens spacing | 17 mm | 8 – 30 |
| Flash hole diameter | 3 mm | 1 – 8 |
| Flash X offset from top lens | 2 mm | -10 – 15 |
| Flash Y offset from top lens | 12 mm | -10 – 30 |
| USB-C opening width (Y) | 9 mm | 5 – 15 |
| USB-C opening height (Z) | 3 mm | 2 – 6 |
| Speaker hole diameter | 1.5 mm | 0.3 – 5 |
| Speaker hole count | 4 | 0 – 12 |
| Speaker hole spacing | 2.5 mm | 1 – 10 |
| Speaker Y offset from center | 5 mm | 0 – 30 |
| Microphone hole diameter | 1.5 mm | 0.3 – 5 |
| Microphone Y offset from center | -6 mm | -30 – 30 |
| Top microphone hole diameter | 1.5 mm | 0 – 5 |
| Power button width | 10 mm | 4 – 20 |
| Power button height | 3 mm | 1 – 8 |
| Power button offset from top | 35 mm | 10 – 60 |
| Volume button width | 22 mm | 5 – 35 |
| Volume button height | 3 mm | 1 – 8 |
| Volume button offset from top | 60 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled