Gears and transmission
S5M Timing Pulley 12T
- Bounding box
- 18.4 × 18.4 × 8.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Buat model CAD 3D timing pulley S5M dengan spesifikasi berikut: - Jumlah gigi: tepat 12. - Pitch: 5 mm. - Diameter pitch: 19,0986 mm. - Lebar pulley: 8,40 mm. - Lubang tengah: tidak ada. - Tanpa poros, baut, dan flange. - Profil gigi harus sesuai standar S5M, bukan HTD 5M atau T5. - Gigi harus tersebar merata dan berjarak sudut 30°. - Diameter luar harus mengikuti geometri profil S5M, bukan diameter pitch. Buat model solid yang presisi, dapat dicetak 3D, dan ekspor sebagai STL. Gunakan satuan mm. Jangan menebak profil gigi jika data standar belum tersedia.
Parameters
| Name | Value | Range |
|---|---|---|
| Number of teeth | 12 mm | 8 – 60 |
| Belt pitch | 5 mm | 1 – 20 |
| Pulley face width | 8.4 mm | 2 – 40 |
| Groove depth from OD [S5M] | 1.91 mm | 0.5 – 5 |
| Groove width at OD | 3 mm | 1 – 8 |
| Groove width at groove bottom | 1.9 mm | 0.5 – 8 |
| Root fillet radius | 0.4 mm | 0.05 – 1.5 |
| Pitch dia minus OD [S5M] | 0.5 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled