Brackets and mounts
Rugged Outdoor Water Purification and Monitoring Unit Enclosure
- Bounding box
- 675.0 × 420.0 × 1444.4 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- September 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a rugged outdoor water purification and monitoring unit enclosure, cylindrical body 400mm diameter x 900mm height, made of UV-resistant HDPE. Top section: sealed lid with a mounted 100W solar panel bracket (300mm x 300mm) at 30-degree tilt, and a weatherproof IoT sensor housing box (120mm x 80mm x 60mm) on the side with cable glands for 4 sensor wires. Middle section: three stacked filter cartridge chambers (each 150mm diameter x 200mm height) connected in series with 25mm inlet/outlet pipe fittings and quick-release cartridge caps. Bottom section: a UV-C sterilization chamber (150mm diameter x 250mm height) with a viewing window, plus a 20L buffer storage tank integrated into the base with a tap outlet at 100mm from the ground. Include a battery compartment (200mm x 150mm x 100mm) at the rear, ventilated. Add mounting feet for ground installation and a small LED status panel (green/yellow/red) on the front face. Overall style: functional industrial hardware, exposed fasteners, matte finish.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Diameter | 400 mm | 300 – 500 |
| Body Height | 900 mm | 700 – 1100 |
| Wall Thickness | 8 mm | 4 – 15 |
| Solar Panel Length | 300 mm | 200 – 400 |
| Solar Panel Width | 300 mm | 200 – 400 |
| Solar Tilt Angle | 30 deg | 0 – 60 |
| Sensor Box Length | 120 mm | 80 – 200 |
| Sensor Box Width | 80 mm | 60 – 150 |
| Sensor Box Height | 60 mm | 40 – 100 |
| Filter Diameter | 150 mm | 100 – 200 |
| Filter Height | 200 mm | 150 – 300 |
| Pipe Diameter | 25 mm | 15 – 50 |
| UV Chamber Diameter | 150 mm | 100 – 200 |
| UV Chamber Height | 250 mm | 200 – 350 |
| Viewing Window Width | 80 mm | 50 – 120 |
| Viewing Window Height | 120 mm | 80 – 180 |
| Tank Capacity (L) | 20 L | 10 – 50 |
| Tap Height from Ground | 100 mm | 50 – 200 |
| Battery Compartment Length | 200 mm | 150 – 300 |
| Battery Compartment Width | 150 mm | 100 – 250 |
| Battery Compartment Height | 100 mm | 80 – 200 |
| Foot Diameter | 60 mm | 40 – 100 |
| Foot Height | 30 mm | 20 – 60 |
| LED Panel Width | 80 mm | 50 – 150 |
| LED Panel Height | 40 mm | 30 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent