Brackets and mounts
Rugged Modular Enclosure for Surface Go 2 with Kinect
- Bounding box
- 409.9 × 307.0 × 204.5 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rugged, 3D printable modular enclosure for a Surface Go 2 with a Kinect on top, two removable side handles, a bottom battery bay, and back access panel, with passive ventilation and cable routing. Target size is about350 millimetres wide,295 high,104 deep, withM4 insert points, tripod mounts, and a battery door. Prioritise clean, parametric geometry, STEP preferred, not an artistic mesh.”
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Width | 350 mm | 300 – 400 |
| Enclosure Height | 295 mm | 250 – 350 |
| Enclosure Depth | 104 mm | 80 – 120 |
| Wall Thickness | 3 mm | 1 – 5 |
| Fillet Radius | 2 mm | 0 – 5 |
| Back Panel Thickness | 2 mm | 1 – 5 |
| Battery Door Width | 150 mm | 100 – 200 |
| Battery Door Height | 100 mm | 80 – 150 |
| Battery Door Thickness | 2 mm | 1 – 5 |
| Handle Length | 100 mm | 80 – 150 |
| Handle Width | 30 mm | 20 – 40 |
| Handle Height | 30 mm | 20 – 40 |
| Handle Mount Thickness | 10 mm | 5 – 15 |
| Top Mount Length | 150 mm | 100 – 200 |
| Top Mount Width | 60 mm | 40 – 80 |
| Top Mount Height | 10 mm | 5 – 20 |
| Screw Hole Diameter (M4) | 4 mm | 3 – 6 |
| Ventilation Slot Width | 3 mm | 2 – 5 |
| Ventilation Slot Length | 20 mm | 10 – 30 |
| Ventilation Slot Count | 8 | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent