Brackets and mounts
Rover Scoop Bucket (Multi-Part Exploded)
- Bounding box
- 2864.0 × 253.5 × 96.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a REAL PARAMETRIC CAD SOLID of a 3D-printable rover scoop bucket. Do NOT create a mesh/STL-only model. It must be exportable as STEP and editable in Fusion 360. Overall bucket: - Width: 300 mm - Depth: 250 mm - Side height: 80 mm - Front edge height: 20 mm - Wall thickness: 4 mm - Bottom thickness: 5 mm - Smooth curved rear/bottom transition - Low-draft ~30° front entry - Smooth internal surface - Solid side walls, NO cutouts or decorative holes PRINTING: The bucket must be split exactly along the longitudinal centre plane into LEFT and RIGHT halves. Each half must fit the Bambu Lab A1 256×256 mm bed and preferably print open-side-up with minimal/no supports. CENTRE JOINT: Make a mechanical, glue-free joint: - Left half has a continuous 5 mm deep alignment tongue. - Right half has matching 5.3 mm groove. - 0.25 mm clearance. - Add 3–4 M4 bolt positions along the centre seam. - Add reinforced bolt bosses. - Bolts should clamp the halves together. - Add a small rear reinforcement/bridge across the seam. FRONT JOINT: Add a separate removable cutting-edge strip across the full 300 mm width. It must bridge both halves and be mechanically bolted to them with M4 fasteners. No glue. MOTOR MOUNT: At the rear/top, create two reinforced mounting ears for a rotary bucket shaft. - Initial shaft diameter: 8 mm - Add bearing/bushing seats. - Add a removable motor mounting plate. - Motor hole pattern must be PARAMETRIC so I can change it later. - Do not assume a specific motor. PARAMETERS: Make these editable: BucketWidth BucketDepth BucketHeight WallThickness BottomThickness TongueDepth GrooveWidth JointClearance BoltDiameter ShaftDiameter MotorMountHoleSpacing FrontEntryAngle FilletRadius OUTPUT: Generate the complete assembled bucket plus: 1. Left half 2. Right half 3. Cutting edge 4. Motor mount 5. Exploded assembly 6. Cross-section of the tongue-and-groove joint 7. Cross-section of the motor/shaft mount Prioritize strong mechanical joints, accurate alignment, low weight and easy Bambu A1 printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Bucket Width | 300 mm | 100 – 600 |
| Bucket Depth | 250 mm | 100 – 500 |
| Side Height | 80 mm | 30 – 200 |
| Front Edge Height | 20 mm | 5 – 80 |
| Wall Thickness | 4 mm | 2 – 12 |
| Bottom Thickness | 5 mm | 2 – 15 |
| Front Entry Angle | 30 deg | 10 – 60 |
| Internal Fillet Radius | 3 mm | 0 – 6 |
| Tongue Depth | 5 mm | 1 – 12 |
| Groove Width | 5.3 mm | 1 – 14 |
| Joint Clearance | 0.25 mm | 0 – 1 |
| Joint Bolt Diameter (M4) | 4 mm | 2 – 8 |
| Rotary Shaft Diameter | 8 mm | 4 – 20 |
| Motor Plate Width | 100 mm | 40 – 200 |
| Motor Plate Depth | 80 mm | 40 – 200 |
| Motor Plate Thickness | 5 mm | 2 – 15 |
| Motor Hole Spacing X | 30 mm | 10 – 120 |
| Motor Hole Spacing Y | 20 mm | 10 – 120 |
| Motor Mount Hole Dia | 4 mm | 2 – 10 |
| Cutting Edge Depth | 30 mm | 10 – 80 |
| Cutting Edge Thickness | 10 mm | 3 – 25 |
| Rear Bridge Length | 60 mm | 20 – 150 |
| Rear Bridge Width | 20 mm | 10 – 80 |
| Rear Bridge Height | 10 mm | 3 – 40 |
| Exploded Layout Gap | 400 mm | 100 – 900 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu