Brackets and mounts
Rover-Mounted Task Tool Assembly
- Bounding box
- 285.0 × 180.0 × 152.4 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a preliminary 3D CAD design of a rover-mounted task tool. The system consists only of a touchscreen mounted on an articulated arm, a front-facing camera with a distance sensor, a Raspberry Pi enclosure, and a power bank. Mount all components on a simple rectangular rover chassis. Do not include any 30-degree rotation mechanism. This is a conceptual engineering prototype, with simple rectangular housings and mechanical supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 250 mm | 150 – 400 |
| Chassis Width | 180 mm | 100 – 300 |
| Chassis Thickness | 15 mm | 5 – 30 |
| Mounting Hole Dia | 5 mm | 2 – 10 |
| Camera Width | 40 mm | 20 – 80 |
| Camera Depth | 30 mm | 15 – 60 |
| Camera Body Height | 25 mm | 10 – 50 |
| Lens Diameter | 15 mm | 5 – 30 |
| Lens Protrusion | 5 mm | 1 – 15 |
| Sensor Width | 35 mm | 15 – 70 |
| Sensor Depth | 25 mm | 10 – 50 |
| Sensor Height | 15 mm | 8 – 40 |
| Sensor LED Dia | 8 mm | 3 – 15 |
| Pi Enclosure Width | 90 mm | 50 – 150 |
| Pi Enclosure Depth | 60 mm | 30 – 100 |
| Pi Enclosure Height | 25 mm | 15 – 50 |
| Pi Port Opening Width | 40 mm | 10 – 70 |
| Pi Port Opening Height | 10 mm | 4 – 25 |
| Power Bank Width | 150 mm | 80 – 250 |
| Power Bank Depth | 60 mm | 30 – 120 |
| Power Bank Height | 25 mm | 10 – 50 |
| USB Port Width | 12 mm | 6 – 25 |
| USB Port Height | 8 mm | 4 – 15 |
| Arm Base X Position | 100 mm | 80 – 120 |
| Arm Segment 1 Length | 60 mm | 30 – 120 |
| Arm Segment 2 Length | 60 mm | 30 – 120 |
| Arm Bracket Width | 30 mm | 15 – 60 |
| Arm Bracket Thickness | 15 mm | 8 – 30 |
| Arm Segment 2 Angle | 45 deg | 0 – 80 |
| Pivot Pin Diameter | 12 mm | 6 – 25 |
| Screen Housing Width | 120 mm | 60 – 200 |
| Screen Housing Height | 70 mm | 40 – 150 |
| Screen Housing Depth | 10 mm | 5 – 25 |
| Display Diagonal | 100 mm | 40 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent