Everything else
Routine Board with Slider Switch
- Bounding box
- 265.2 × 205.2 × 10.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
θελω να φτιαξω αυτο το πινακα ρουτινας σε μερη για το 3D εκτυπωση στον εκτυπωττη μου . θελω αποσπωμενα μερη αλλα να κουμπωνουν μεταξυ τους και η βαση με το μπροστινο μερος με τα κενα και ο διακοπτης δεξιά που θα ανοιγοκλεινει
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 180 mm | 120 – 300 |
| Height | 140 mm | 100 – 240 |
| Base thickness | 3 mm | 2 – 6 |
| Front panel thickness | 4 mm | 2 – 8 |
| Outer margin | 10 mm | 4 – 30 |
| Window columns | 2 mm | 1 – 4 |
| Window rows | 3 mm | 1 – 6 |
| Window width | 50 mm | 30 – 100 |
| Window height | 30 mm | 20 – 80 |
| Window gap | 6 mm | 2 – 20 |
| Slider width | 28 mm | 16 – 50 |
| Slider height | 46 mm | 24 – 80 |
| Slider travel | 20 mm | 10 – 40 |
| Slider knob diameter | 8 mm | 6 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm