Rounded Base Slab with Foot Pads and Vertical Body Slab

1 views

Bounding box: 480 × 420 × 460 mm
Engine: 3D Printing B-rep
Parameters: 14
Published: November 9, 2026

Download

Free to download and use. See the terms.

The prompt

Keep the existing 480x420x110 base. Add a vertical body slab: 200 wide (X), 330 deep (Y), from Z=110 to Z=460. Place it on the left: left face flush with the base left face, front face 40 mm behind the base front face. Round its outer vertical edges R12.

Parameters

Name	Value	Range
Base width, X	480 mm	100 – 1000
Base depth, Y	420 mm	100 – 1000
Slab height, Z	110 mm	10 – 400
Vertical corner radius	12 mm	2 – 60
Top edge fillet radius	6 mm	1 – 40
Foot pad square size	40 mm	10 – 120
Foot pad height	10 mm	2 – 60
Inset of pad edge from base side	40 mm	0 – 120
Body slab width, X	200 mm	40 – 900
Body slab depth, Y	330 mm	40 – 900
Body slab height	350 mm	20 – 800
Body slab bottom height above floor	110 mm	0 – 600
Body front face set back from base front face	40 mm	0 – 400
Body vertical corner radius	12 mm	2 – 60

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS