Brackets and mounts
Round Sponge Holder with Fan Feathers
- Bounding box
- 149.1 × 203.0 × 64.5 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
Add three large rounded feather shapes behind the outside of the round holder at the top. Arrange the three feathers like a fan. Keep the round holder and drainage holes exactly unchanged. Do not cover the inside of the holder. Make the feathers connected to the outside back of the holder and do not create floating parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Inside Diameter | 107 mm | 50 – 200 |
| Inside Depth | 43 mm | 20 – 100 |
| Wall Thickness | 3 mm | 2 – 10 |
| Bottom Thickness | 3 mm | 2 – 10 |
| Drainage Hole Diameter | 6 mm | 3 – 12 |
| Drainage Hole Count | 6 | 3 – 12 |
| Drainage Hole Circle Diameter | 60 mm | 20 – 100 |
| Feather Length | 90 mm | 50 – 150 |
| Feather Width | 40 mm | 20 – 80 |
| Feather Thickness | 3 mm | 2 – 8 |
| Feather Angle Spread | 60 deg | 30 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent