Gears and transmission
Round Rack and Pinion Assembly
- Bounding box
- 545.0 × 232.0 × 124.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
I want a round rack and pinion in which we have 2 round racks one is 350 mm long with two side hydraulic oil supply nosel s and the other rack is size 200 mm and in between there is a pinion of 30 teeth module 2mm pitch 60 mm gear outside diameter 64mm gear root diameter 55mm rack shaft outer diameter 30mm liner tooth pitch 6.283mm and its placement is in 200x200x60mm from front side at center distance of 90mmand center drive bore is 20 mm please preapre a 3d drawing for the same
Parameters
| Name | Value | Range |
|---|---|---|
| Module (mm) | 2 mm | 0.5 – 10 |
| Pressure Angle (deg) | 20 deg | 14 – 30 |
| Pinion Teeth | 30 | 10 – 100 |
| Pinion Face Width (mm) | 40 mm | 5 – 100 |
| Pinion Bore (mm) | 20 mm | 5 – 50 |
| Shaft OD (mm) | 30 mm | 10 – 60 |
| Top Rack Length (mm) | 350 mm | 100 – 500 |
| Bottom Rack Length (mm) | 200 mm | 50 – 300 |
| Nozzle OD (mm) | 12 mm | 5 – 30 |
| Nozzle Length (mm) | 25 mm | 10 – 50 |
| Thread OD (mm) | 8 mm | 4 – 20 |
| Thread Length (mm) | 5 mm | 2 – 15 |
| Internal Hole (mm) | 6 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a