Everything else
Rotor semicóncavo con 7 aletas
- Bounding box
- 60 × 60 × 20 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Base circular: tiene forma de plato semiconcavo, no es plana. Siete aletas radiales: son rectas, alargadas y sobresalen de la superficie de la base. No son álabes curvos de una turbina convencional. Distribución: las siete aletas nacen alrededor del cubo central y se extienden hacia el perímetro. Extremos: las aletas terminan cerca del borde exterior y tienen puntas ligeramente redondeadas. Cubo central: es cilíndrico, elevado y tiene un orificio pasante. Aberturas: tiene dos perforaciones rectangulares enfrentadas, una a cada lado del cubo. Refuerzos centrales: se observan pequeñas nervaduras entre el cubo y las aberturas rectangulares.
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 60 mm | 30 – 200 |
| Base edge height | 4 mm | 2 – 10 |
| Base center thickness | 2 mm | 1 – 8 |
| Hub diameter | 12 mm | 5 – 40 |
| Hub height | 18 mm | 5 – 40 |
| Shaft hole diameter | 6 mm | 1 – 12 |
| Number of radial fins | 7 mm | 3 – 12 |
| Fin height above base center | 14 mm | 5 – 40 |
| Fin thickness | 2.4 mm | 1 – 8 |
| Rectangular slot length | 10 mm | 4 – 20 |
| Rectangular slot width | 3.5 mm | 1 – 8 |
| Slot gap from hub | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm