Gears and transmission
Rotating Waste Sorter Assembly
- Bounding box
- 500.2 × 500.0 × 826.1 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- October 19, 2026
Download
Free to download and use. See the terms.
The prompt
idea ke according main mechanism ye hoga: upar ek hi input, neeche 3 dustbins, aur teeno dustbins ek rotating circular platform par mounted honge. AI waste ko detect karega aur motor poore bin-platform ko rotate karke correct dustbin ko input ke neeche le aayegi.3. Fusion 360 ke liye dimensions Component Suggested dimension Overall body Ø500 × 700 mm height Input hopper 180 × 180 mm opening Circular rotating platform Ø420 mm Three bins Approx. 160–180 mm wide each Central shaft 10–12 mm Base plate 5–6 mm Bin clearance 10–15 mm between moving parts and fixed enclosure, where practical Ye initial dimensions hain. Circular layout mein bins ko 120° apart arrange karna hoga. Actual bin shape aur platform diameter ke basis par dimensions adjust hongi. 4. Fusion 360 assembly mein kaunse parts banao? 1. Outer_Body — stationary enclosure. 2. Input_Hopper — top funnel. 3. Rotating_Platform — circular disc. 4. Central_Shaft — platform rotation axis. 5. Bearing_Mount — shaft ko support karne ke liye. 6. Dry_Bin, Wet_Bin, Hazardous_Bin — platform par mounted. 7. Motor_Bracket — geared motor aur coupling mount. 8. Camera_Mount — input ke paas fixed camera bracket. Mechanical recommendation: Teen bins ko ek hi platform par mount karo aur platform ko geared motor se rotate karao. Heavy bins ko directly small hobby servo par load mat dena. Bearing-supported shaft aur suitable geared motor use karna; position feedback ya limit/home sensor bhi add karna. 5. Important safety and AI point Hazardous waste ko camera se identify karna guaranteed nahi hai. Unknown ya low-confidence item ko normal bin mein mat bhejo; uske liye reject/hold position ya manual inspection rakho. Hazardous bin ko closed aur clearly labelled rakho. Agla best step: pehle Fusion 360 mein rotating platform, shaft, bearings aur bins ka assembly model banao. Uske baad motor torque, indexing accuracy aur AI control integrate karo.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Body Diameter | 500 mm | 400 – 700 |
| Outer Body Height | 700 mm | 500 – 1000 |
| Outer Wall Thickness | 5 mm | 2 – 12 |
| Service Opening Width | 150 mm | 80 – 250 |
| Service Opening Height | 300 mm | 100 – 500 |
| Service Opening Center Z | 350 mm | 100 – 600 |
| Hopper Top Opening | 180 mm | 100 – 250 |
| Hopper Bottom Opening | 100 mm | 50 – 180 |
| Hopper Height | 100 mm | 50 – 200 |
| Rotating Platform Diameter | 420 mm | 300 – 480 |
| Rotating Platform Thickness | 8 mm | 4 – 15 |
| Central Shaft Diameter | 12 mm | 8 – 15 |
| Central Shaft Length | 200 mm | 150 – 300 |
| Bearing Mount Length | 80 mm | 50 – 120 |
| Bearing Mount Width | 80 mm | 50 – 120 |
| Bearing Mount Height | 30 mm | 15 – 50 |
| Bin Width | 170 mm | 140 – 200 |
| Bin Depth | 170 mm | 140 – 200 |
| Bin Height | 300 mm | 200 – 400 |
| Bin Wall Thickness | 4 mm | 2 – 8 |
| Bin Radial Position | 115 mm | 60 – 180 |
| Motor Bracket Length | 120 mm | 80 – 180 |
| Motor Bracket Width | 80 mm | 50 – 120 |
| Motor Bracket Thickness | 6 mm | 3 – 10 |
| Motor Offset X | 100 mm | 40 – 180 |
| Camera Radial Depth | 40 mm | 20 – 80 |
| Camera Width | 40 mm | 20 – 80 |
| Camera Height | 20 mm | 10 – 50 |
| Camera Height Z | 600 mm | 400 – 700 |
| Camera Radial Inset | 0 mm | 0 – 20 |
| Base Plate Diameter | 500 mm | 400 – 700 |
| Base Plate Thickness | 6 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled