Brackets and mounts
Rotating Elevated Laptop Stand
- Bounding box
- 320.0 × 277.3 × 360.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rotating elevated laptop stand 1. Core Architectural Layout & Kinematics • Form Factor: A modular, heavy-duty "X-frame" or "Spine-based" articulating laptop riser featuring a multi-axis rotation and pivot assembly. • Rotation Mechanism: The base must feature a 360-degree flat rotating turntable mechanism built into a low-profile stabilizer disc. This allows the user to rotate the entire stand infinitely in either horizontal direction across a desk surface. • Pivot & Elevation Joints: • Equip the main anodized aluminum backbone with dual adjustable friction-disc pivot joints (one at the base connection, one at the holder cradle connection). • The joints must tilt up to 90 degrees forward and backward to dynamically achieve a precise 15° to 20° downward viewing angle for the user's laptop screen. • Locking & Stability System: Every articulating pivot axis must integrate a heavy-duty, rigid lockable joint system controlled by mechanical tension clamps. The internal friction discs must be rated to compress tightly, completely freezing the posture into position under heavy loads with a target structural deflection of less than 10 mm. 2. Load Capacity & Geometry Boundaries • Dynamic Load Rating: The structural frame must withstand a heavy dynamic load of up to 10 kg (22 lbs) without slipping, tilting, or buckling. • Thermal Clearance & Ventilation: • The top holding cradle must feature an open-back design or a wide center cutout, creating an intentional hollow gap in the middle of the frame. • The stand geometry must maintain a strict, non-negotiable 25 mm minimum clearance gap between the lower edge of the mounted device and the surface of the desk to induce a high-efficiency passive, chimney-effect convective cooling flow. 3. Material Callouts & Textures (Layered Composite) • Structural Backbone: Design the main supporting vertical spine, joint housings, and desk clamps using precision-machined, anodized aluminum alloy. The surface finish should be matte-blasted metallic gray or deep silver. • Device Cradle & Contact Pads: Mold the actual laptop bed out of structural, thermoformed R-PET (recycled polyethylene terephthalate) felt. The felt texture should look softly fibrous, porous, and highly tactile to provide an elegant, premium look. • Grip, Dampening, & Accents: Integrate high-traction molded TPU (thermoplastic polyurethane) interfaces on all terminal contact edges. These act as high-friction non-slip lips to safely secure the laptop base, prevent raw metal-on-device scratching, and provide localized shock absorption.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 220 mm | 150 – 300 |
| Base Thickness | 15 mm | 8 – 30 |
| Turntable Plate Diameter | 200 mm | 140 – 280 |
| Turntable Plate Thickness | 5 mm | 2 – 10 |
| Lower Pivot Width | 70 mm | 50 – 120 |
| Lower Pivot Height | 55 mm | 30 – 100 |
| Lower Pivot Depth | 45 mm | 30 – 80 |
| Lower Pivot Pin Hole Diameter | 10 mm | 6 – 16 |
| Spine Length | 300 mm | 150 – 500 |
| Spine Width | 55 mm | 30 – 100 |
| Spine Thickness | 18 mm | 10 – 30 |
| Cable Slot Width | 10 mm | 4 – 20 |
| Cable Slot Length | 200 mm | 50 – 350 |
| Upper Pivot Width | 65 mm | 40 – 100 |
| Upper Pivot Height | 50 mm | 30 – 80 |
| Upper Pivot Depth | 42 mm | 25 – 70 |
| Upper Pivot Pin Hole Diameter | 10 mm | 6 – 16 |
| Cradle Width | 320 mm | 200 – 450 |
| Cradle Depth | 240 mm | 150 – 350 |
| Cradle Thickness | 12 mm | 6 – 20 |
| Cradle Tilt Angle | 18 deg | 5 – 30 |
| Central Cutout Width | 200 mm | 100 – 300 |
| Central Cutout Depth | 140 mm | 80 – 200 |
| Back Opening Width | 100 mm | 50 – 200 |
| Grip Lip Width | 300 mm | 200 – 400 |
| Grip Lip Depth | 18 mm | 10 – 30 |
| Grip Lip Height | 12 mm | 5 – 25 |
| Side Pad Length | 100 mm | 50 – 150 |
| Side Pad Width | 14 mm | 8 – 25 |
| Side Pad Thickness | 8 mm | 4 – 15 |
| Side Pad Inset | 0 mm | 0 – 30 |
| Clamp Knob Diameter | 28 mm | 15 – 45 |
| Clamp Knob Height | 18 mm | 10 – 30 |
| Clamp Knob Shaft Diameter | 8 mm | 4 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu