Gears and transmission
Rotary Shaker Drive Pulleys
- Bounding box
- 110.0 × 60.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single 3D solid model representing the drive mechanism of a rotary shaker. Units: millimeters (mm). Do NOT create an assembly. Create one combined part. - Create a large wooden pulley: cylinder diameter 60mm, thickness 10mm. Central through-hole 8.2mm. V-groove around outer edge: 2mm deep, 3mm wide. - Create a small wooden pulley: cylinder diameter 20mm, thickness 10mm. Central through-hole 6.2mm. V-groove around outer edge: 2mm deep, 3mm wide. - Position the small pulley 70mm to the right of the large pulley, both in the same horizontal plane (Z=0). - Do NOT add a belt. Just the two pulleys positioned correctly. - Apply a 1mm fillet to all sharp edges.
Parameters
| Name | Value | Range |
|---|---|---|
| Large Pulley Diameter | 60 mm | 10 – 200 |
| Large Pulley Bore | 8.2 mm | 1 – 30 |
| Small Pulley Diameter | 20 mm | 5 – 100 |
| Small Pulley Bore | 6.2 mm | 0.5 – 20 |
| Pulley Thickness | 10 mm | 1 – 50 |
| Center Distance | 70 mm | 50 – 200 |
| V-Groove Depth | 2 mm | 0.5 – 5 |
| V-Groove Width | 3 mm | 1 – 10 |
| Fillet Radius | 1 mm | 0 – 3 |
| Connecting Web Width | 5 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled