Gears and transmission
Rod Holder Assembly for GearTrac
- Bounding box
- 276.0 × 80.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Important: * DO NOT model or include the kayak rail or track. * DO NOT create the rail as part of the model. * Only create the rod holder assembly and the sliding track adapter that inserts into an existing YakAttack GearTrac/GT90-style rail. * The sliding adapter should be a separate removable part, not attached to the rail. Split the model into separate printable parts: 1. Main rod holder body 2. Rear locking cup 3. Rotating pivot joint 4. Pivot locking wheel/knob 5. Sliding track adapter 6. Locking T-bolt or track foot 7. Any spacers or bushings All parts must be separate solids ready for individual STL export. Design the parts to assemble using M5 or M6 stainless steel bolts, washers, and lock nuts. The track adapter must slide into an existing YakAttack GearTrac/GT90-style rail and lock securely with a thumb knob. Do not include or model the rail itself. Optimize every part for FDM printing in PETG or ASA with minimal supports. Export each component as its own STL plus a complete assembly STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Main Body Length | 120 mm | 60 – 200 |
| Main Body Width | 80 mm | 40 – 150 |
| Main Body Height | 50 mm | 30 – 80 |
| Wall Thickness | 5 mm | 3 – 10 |
| Cup Outer Diameter | 40 mm | 20 – 70 |
| Cup Height | 30 mm | 20 – 50 |
| Cup Wall Thickness | 4 mm | 2 – 8 |
| Cup Slot Width | 12 mm | 6 – 20 |
| Pivot Disc Diameter | 60 mm | 30 – 100 |
| Pivot Disc Thickness | 10 mm | 5 – 20 |
| Pivot Bore Diameter | 8 mm | 4 – 16 |
| Pivot Gear Teeth | 30 | 10 – 60 |
| Knob Diameter | 30 mm | 15 – 50 |
| Knob Thickness | 12 mm | 6 – 25 |
| Knob Stud Diameter | 6 mm | 4 – 10 |
| Knob Stud Length | 25 mm | 10 – 40 |
| Adapter Length | 50 mm | 30 – 80 |
| Adapter Width | 30 mm | 20 – 50 |
| Adapter Body Height | 20 mm | 10 – 30 |
| Adapter Neck Width | 6 mm | 4 – 12 |
| Adapter Head Width | 24 mm | 12 – 40 |
| Adapter Head Height | 6 mm | 3 – 12 |
| T-Bolt Thread Diameter | 6 mm | 4 – 10 |
| T-Bolt Length | 30 mm | 15 – 60 |
| T-Bolt Head Width | 16 mm | 10 – 25 |
| T-Bolt Head Thickness | 4 mm | 2 – 8 |
| Washer Outer Diameter | 12 mm | 8 – 20 |
| Washer Inner Diameter | 6 mm | 4 – 10 |
| Washer Thickness | 2 mm | 1 – 4 |
| Bushing Outer Diameter | 12 mm | 8 – 20 |
| Bushing Inner Diameter | 8 mm | 4 – 14 |
| Bushing Length | 10 mm | 5 – 20 |
| Exploded Layout Gap | 30 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a