Brackets and mounts
Rocker-Bogie Rover Chassis and Suspension (Exploded)
- Bounding box
- 11050.0 × 760.0 × 150.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD assembly of the autonomous rocker-bogie rover shown in the attached reference drawing. Use millimeters. Critical dimensions: - Overall length: 900 mm - Overall width: 760 mm - Overall height: 520 mm - Wheel track: 700 mm center-to-center - Wheelbase: 750 mm - Ground clearance: 138 mm - 6 wheels - Wheel diameter: 150 mm - Wheel width: 60 mm Create separate editable components, not one fused solid. The rover consists of: 1. Main rectangular chassis 2. Left and right rocker-bogie suspension 3. Six wheels and six motor assemblies 4. Central differential linkage 5. Top-mounted 3-DOF robotic arm 6. Two-finger gripper 7. Electronics enclosure 8. Camera and ultrasonic sensor mounts Match the shape and proportions of the attached drawing as closely as possible. Begin by creating ONLY the complete chassis, rocker-bogie suspension, six wheels, motors, and differential linkage. Keep all parts separate and editable. Do not create decorative details or internal electronics yet.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 950 mm | 500 – 3000 |
| Chassis Length | 900 mm | 400 – 1800 |
| Chassis Width | 760 mm | 400 – 1600 |
| Chassis Thickness | 40 mm | 10 – 80 |
| Rocker Arm Length | 350 mm | 150 – 600 |
| Rocker Arm Width | 30 mm | 12 – 60 |
| Rocker Arm Height | 40 mm | 12 – 80 |
| Rocker Pivot Bore | 10 mm | 4 – 30 |
| Bogie Arm Length | 250 mm | 100 – 500 |
| Bogie Arm Width | 25 mm | 10 – 60 |
| Bogie Arm Height | 30 mm | 10 – 60 |
| Bogie Pivot Bore | 10 mm | 4 – 30 |
| Wheel Diameter | 150 mm | 50 – 300 |
| Wheel Width | 60 mm | 20 – 120 |
| Motor Housing Diameter | 80 mm | 30 – 150 |
| Motor Housing Length | 40 mm | 10 – 80 |
| Wheel Axle Bore | 10 mm | 4 – 30 |
| Differential Link Length | 300 mm | 150 – 600 |
| Differential Link Width | 30 mm | 10 – 60 |
| Differential Link Height | 12 mm | 5 – 50 |
| Differential Pivot Bore | 10 mm | 4 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent