Everything else
Robotic Hand Assembly
- Bounding box
- 184.1 × 304.0 × 28.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Robotic hand tendon driven dextrous each finger should close up and down and move side to side and thumb should have two main movements across and too part of thumb closing and now the hand design ahould be close to human hand and have hooks for routing of tendons and make palm hollow
Parameters
| Name | Value | Range |
|---|---|---|
| Palm Width | 100 mm | 50 – 200 |
| Palm Height | 85 mm | 50 – 200 |
| Palm Depth | 20 mm | 10 – 50 |
| Wall Thickness | 3 mm | 1 – 10 |
| Index Finger Length | 120 mm | 50 – 200 |
| Index Finger Width | 18 mm | 8 – 40 |
| Index Finger Thickness | 14 mm | 5 – 30 |
| Middle Finger Length | 130 mm | 50 – 200 |
| Middle Finger Width | 18 mm | 8 – 40 |
| Middle Finger Thickness | 14 mm | 5 – 30 |
| Ring Finger Length | 125 mm | 50 – 200 |
| Ring Finger Width | 17 mm | 8 – 40 |
| Ring Finger Thickness | 13 mm | 5 – 30 |
| Little Finger Length | 105 mm | 50 – 200 |
| Little Finger Width | 15 mm | 8 – 40 |
| Little Finger Thickness | 12 mm | 5 – 30 |
| Thumb Length | 115 mm | 50 – 200 |
| Thumb Width | 20 mm | 8 – 40 |
| Thumb Thickness | 16 mm | 5 – 30 |
| Phalange Gap | 1 mm | 0 – 5 |
| Thumb Angle (deg) | 45 ° | 0 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like