Loading the interactive model…
Interactive 3D model of Robotic Arm Assembly (5-DOF)Everything else
Robotic Arm Assembly (5-DOF)
6 views
- Bounding box
- 671.1 × 120.1 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
make the assembly i want it as a final product view
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 120 mm | 80 – 200 |
| Base Height | 20 mm | 10 – 40 |
| Base Center Hole | 8 mm | 5 – 20 |
| Bolt Circle Diameter | 90 mm | 50 – 150 |
| Bolt Hole Diameter | 8 mm | 4 – 12 |
| Clearance | 0.3 mm | 0.1 – 1 |
| Wall Thickness | 3 mm | 2 – 5 |
| Fillet Radius | 5 mm | 1 – 10 |
| MG996R Length | 40 mm | 30 – 50 |
| MG996R Width | 20 mm | 15 – 25 |
| MG996R Height | 38 mm | 30 – 45 |
| MG996R Shaft Diameter | 6 mm | 4 – 8 |
| MG996R Shaft Length | 12 mm | 8 – 18 |
| MG90S Length | 23 mm | 20 – 30 |
| MG90S Width | 12 mm | 10 – 15 |
| MG90S Height | 27 mm | 25 – 35 |
| MG90S Shaft Diameter | 4.5 mm | 3 – 6 |
| MG90S Shaft Length | 10 mm | 6 – 14 |
| Shoulder Width | 50 mm | 30 – 80 |
| Shoulder Height | 30 mm | 20 – 50 |
| Shoulder Length | 200 mm | 150 – 300 |
| Cable Hole Diameter | 10 mm | 5 – 20 |
| Elbow Width | 50 mm | 30 – 80 |
| Elbow Height | 30 mm | 20 – 50 |
| Elbow Length | 180 mm | 130 – 250 |
| Cable Hole Diameter | 10 mm | 5 – 20 |
| Bracket Width | 30 mm | 20 – 50 |
| Bracket Height | 20 mm | 15 – 30 |
| Bracket Thickness | 10 mm | 6 – 15 |
| Servo Mount Hole Dia | 3.5 mm | 3 – 5 |
| Bracket Width | 40 mm | 30 – 60 |
| Bracket Length | 30 mm | 20 – 50 |
| Bracket Thickness | 10 mm | 6 – 15 |
| Bearing Hole Diameter | 22 mm | 18 – 30 |
| Plate Width | 50 mm | 30 – 80 |
| Plate Length | 50 mm | 30 – 80 |
| Plate Thickness | 6 mm | 4 – 12 |
| Hole Spacing | 40 mm | 20 – 60 |
| Hole Diameter | 3.5 mm | 3 – 5 |
| Bearing Outer Diameter | 22 mm | 18 – 30 |
| Bearing Inner Diameter | 8 mm | 6 – 12 |
| Bearing Width | 7 mm | 5 – 10 |
| Exploded View Gap | 60 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS