Loading the interactive model…
Interactive 3D model of Robotic 5-Finger Hand with Motors and Screw DriversEverything else
Robotic 5-Finger Hand with Motors and Screw Drivers
7 views
- Bounding box
- 154.9 × 93.0 × 149.5 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 26, 2026
Download
Free to download and use. See the terms.
The prompt
create a real robotics 5 finger hand with motors and skrew drivers
Parameters
| Name | Value | Range |
|---|---|---|
| Palm Length | 80 mm | 50 – 120 |
| Palm Width | 95 mm | 60 – 130 |
| Palm Thickness | 22 mm | 15 – 35 |
| Palm Edge Fillet | 4 mm | 0 – 8 |
| Wrist Collar Radius | 18 mm | 10 – 30 |
| Wrist Collar Length | 15 mm | 5 – 30 |
| Finger Radius | 7 mm | 4 – 12 |
| Proximal Phalanx Length | 32 mm | 20 – 50 |
| Middle Phalanx Length | 22 mm | 12 – 40 |
| Distal Phalanx Length | 18 mm | 10 – 30 |
| Fingertip Cap Length | 8 mm | 4 – 14 |
| Thumb Splay Angle | 35 deg | 0 – 60 |
| Joint Knuckle Radius | 9 mm | 6 – 14 |
| Joint Knuckle Height | 5 mm | 3 – 10 |
| Finger Motor Radius | 11 mm | 7 – 16 |
| Finger Motor Height | 14 mm | 8 – 22 |
| Screw Head Radius | 3 mm | 1.5 – 5 |
| Screw Head Height | 1.5 mm | 0.5 – 3 |
| Servo Driver Width | 18 mm | 10 – 28 |
| Servo Driver Length | 30 mm | 18 – 45 |
| Servo Driver Height | 12 mm | 6 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS