Brackets and mounts
Robot Mounting Plate
- Bounding box
- 200.0 × 120.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- October 16, 2026
Download
Free to download and use. See the terms.
The prompt
Change the plate size to 200 mm × 120 mm × 15 mm. Keep four robot mounting holes centered on the plate with 53 mm spacing in X and 53 mm spacing in Y. Use 4.5 mm through holes with 8 mm counterbores, 4 mm deep. Add two 11 mm through holes for M10 desk clamps, one near the left edge and one near the right edge, centered along the Y axis and 20 mm from each side edge.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length (X) | 200 mm | 80 – 400 |
| Plate Width (Y) | 120 mm | 60 – 300 |
| Plate Thickness | 15 mm | 4 – 40 |
| Corner Radius | 8 mm | 0 – 25 |
| Mounting Hole Spacing X | 53 mm | 10 – 300 |
| Mounting Hole Spacing Y | 53 mm | 10 – 300 |
| Mounting Hole Diameter | 4.5 mm | 1 – 12 |
| Counterbore Diameter | 8 mm | 2 – 20 |
| Counterbore Depth | 4 mm | 0 – 12 |
| Clamp Hole Diameter | 11 mm | 3 – 20 |
| Clamp Hole Edge Offset | 20 mm | 5 – 60 |
| Groove Width | 8 mm | 2 – 30 |
| Groove Depth | 5 mm | 0 – 12 |
| Center Recess Diameter | 30 mm | 0 – 90 |
| Center Recess Depth | 3 mm | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu