Gears and transmission
Robot Chassis Assembly - Exploded Part Set
- Bounding box
- 2733.2 × 120.0 × 71.5 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
Analyze the uploaded robot image as a professional mechanical design engineer. I want to recreate this robot accurately in SolidWorks 3D CAD. Generate a complete set of detailed 2D engineering orthographic drawings, including: 1. Front View – Full front elevation. 2. Side View – Full right-side elevation. 3. Top View – Plan view. 4. Isometric View – 3D reference view. Technical Drawing Requirements: * Use accurate orthographic projection with consistent proportions across all views. * Include all visible mechanical components and structural details. * Show the chassis, frame, supports, brackets, joints, wheels, motors, shafts, gears, holes, fasteners, and other mechanical parts where applicable. * Add dimension lines and numerical dimensions in millimeters (mm). * Specify overall length, width, height, and individual component dimensions. * Identify hole diameters, center distances, shaft diameters, plate thicknesses, and mounting positions. * Show hidden lines and centerlines where necessary. * Separate complex assemblies into individual components if needed. * Provide an exploded view to help understand how the robot is assembled. SolidWorks Modeling Requirements: Break down the robot into individual parts that can be modeled separately in SolidWorks, and explain the recommended modeling sequence. For each component, provide: * Component name. * Estimated dimensions. * Material recommendation. * Geometric features. * Suggested SolidWorks operations (Extrude, Revolve, Sweep, Loft, Hole Wizard, Fillet, etc.). IMPORTANT: Do not invent dimensions and present them as exact measurements. If the image does not provide enough information, clearly label dimensions as estimated and explain the assumptions. The final output should look like a professional mechanical engineering technical drawing suitable for manufacturing and detailed SolidWorks modeling. Prioritize technical accuracy, clarity, and complete mechanical details over artistic appearance.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 40 mm | 5 – 200 |
| Deck Length | 180 mm | 100 – 300 |
| Deck Width | 120 mm | 60 – 220 |
| Deck Thickness | 5 mm | 2 – 12 |
| Deck Mounting Hole Dia | 3.4 mm | 2 – 8 |
| Deck Hole Edge Inset | 12 mm | 5 – 40 |
| Rail Length | 180 mm | 100 – 300 |
| Rail L-Section Leg | 25 mm | 15 – 60 |
| Rail Wall Thickness | 4 mm | 2 – 10 |
| Rail M3 Clearance Hole | 3.4 mm | 2 – 8 |
| Gearmotor Overall Length | 70 mm | 40 – 140 |
| Gearmotor Width | 45 mm | 20 – 90 |
| Gearmotor Height | 35 mm | 20 – 80 |
| Output Shaft Dia | 6 mm | 3 – 12 |
| Output Shaft Protrusion | 25 mm | 5 – 60 |
| Drive Wheel Outside Dia | 65 mm | 30 – 140 |
| Drive Wheel Width | 25 mm | 8 – 60 |
| Drive Wheel Hub Bore | 6 mm | 3 – 12 |
| Caster Wheel Dia | 30 mm | 15 – 60 |
| Caster Wheel Width | 15 mm | 6 – 40 |
| Caster Mounting Plate | 30 mm | 15 – 60 |
| Tray Length | 120 mm | 50 – 220 |
| Tray Width | 80 mm | 30 – 160 |
| Tray Plate Thickness | 4 mm | 2 – 10 |
| Standoff Height | 12 mm | 4 – 50 |
| Standoff Screw Hole Dia | 3.4 mm | 2 – 8 |
| Cable Clearance Hole Dia | 12 mm | 4 – 40 |
| Sensor Head Length | 50 mm | 25 – 100 |
| Sensor Head Width | 40 mm | 20 – 90 |
| Sensor Head Height | 60 mm | 30 – 140 |
| Front Lens Opening Dia | 25 mm | 8 – 50 |
| Battery Pack Length | 90 mm | 40 – 180 |
| Battery Pack Width | 60 mm | 25 – 120 |
| Battery Pack Height | 25 mm | 10 – 60 |
| Axle Shaft Dia | 6 mm | 3 – 14 |
| Axle Shaft Length | 50 mm | 15 – 140 |
| M3 Screw Nominal Dia | 3 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled