Brackets and mounts
Robot Chassis Assembly
- Bounding box
- 250.0 × 152.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
A 3D model of a robot chassis. Create two identical flat rectangular plates (250mm x 150mm x 5mm) with rounded corners (10mm radius). Stack the top plate exactly 35mm above the bottom plate. On the bottom plate, add four downward-facing rectangular motor mounts (30mm x 10mm x 20mm) near the four corners. On the top plate, add a small vertical plate at the front edge (25mm x 25mm x 3mm) with a 10mm hole in the center for a camera.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 250 mm | 100 – 500 |
| Plate Width | 150 mm | 50 – 300 |
| Plate Thickness | 5 mm | 2 – 20 |
| Corner Radius | 10 mm | 0 – 30 |
| Plate Spacing | 35 mm | 10 – 100 |
| Motor Mount Length | 30 mm | 10 – 60 |
| Motor Mount Width | 10 mm | 5 – 30 |
| Motor Mount Height | 20 mm | 5 – 50 |
| Motor Inset X | 15 mm | 0 – 50 |
| Motor Inset Y | 5 mm | 0 – 30 |
| Camera Plate Width | 25 mm | 10 – 60 |
| Camera Plate Height | 25 mm | 10 – 60 |
| Camera Plate Thickness | 3 mm | 1 – 10 |
| Camera Hole Diameter | 10 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent