Brackets and mounts
Robot Arm Table Mounting Plate with Clamp Locating Pockets
- Bounding box
- 200.0 × 120.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 16, 2026
Download
Free to download and use. See the terms.
The prompt
Add two rectangular locating pockets around the existing M10 clamp holes. Each pocket shall be 31 mm wide, 36 mm long, and 2 mm deep. Keep the existing 11 mm M10 through hole centered in each pocket. Add 2 mm internal corner radii to provide clearance for the bent stainless-steel clamp. Both pockets must have the same orientation and remain on the same long edge of the plate. Do not change the four central robot-arm mounting holes.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length (X) | 200 mm | 50 – 400 |
| Plate Width (Y) | 120 mm | 50 – 400 |
| Plate Thickness | 15 mm | 3 – 50 |
| Plate Corner Radius | 5 mm | 0 – 20 |
| Mounting Hole Spacing X | 53 mm | 10 – 200 |
| Mounting Hole Spacing Y | 53 mm | 10 – 200 |
| Mounting Hole Diameter | 4 mm | 2 – 12 |
| Mounting Counterbore Dia | 8 mm | 3 – 20 |
| Mounting Counterbore Depth | 4.5 mm | 0 – 10 |
| Clamp Hole Diameter (M10) | 11 mm | 5 – 30 |
| Clamp Counterbore Dia | 20 mm | 12 – 40 |
| Clamp Counterbore Depth | 11 mm | 0 – 15 |
| Clamp Hole Edge Offset | 20 mm | 5 – 60 |
| Clamp Hole End Offset | 40 mm | 5 – 95 |
| Locating Pocket Width (Y) | 31 mm | 12 – 60 |
| Locating Pocket Length (X) | 36 mm | 12 – 80 |
| Locating Pocket Depth | 2 mm | 0 – 10 |
| Pocket Internal Corner Radius | 2 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu