Brackets and mounts
Robot Arm Mounting Plate with Same-Edge M10 Clamps
- Bounding box
- 200.0 × 120.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 16, 2026
Download
Free to download and use. See the terms.
The prompt
Keep the plate size at 200 mm × 120 mm × 15 mm. Keep the four central robot mounting holes with 53 mm spacing in X and 53 mm spacing in Y. Move both M10 clamp holes to the same long edge of the plate. Place the two 11 mm through holes 20 mm from that long edge and approximately 40 mm from the left and right ends of the plate. Keep the M10 top counterbores. The two clamps will both attach to the same side of the table, so do not place clamp holes on opposite sides.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length (X) | 200 mm | 100 – 400 |
| Plate Width (Y) | 120 mm | 60 – 300 |
| Plate Thickness (Z) | 15 mm | 5 – 40 |
| Corner Radius | 6 mm | 0 – 20 |
| Mounting Hole Spacing (X) | 53 mm | 10 – 150 |
| Mounting Hole Spacing (Y) | 53 mm | 10 – 150 |
| M4 Through Hole Dia. | 4.5 mm | 2 – 10 |
| M4 Counterbore Dia. | 8 mm | 4 – 20 |
| M4 Counterbore Depth | 4 mm | 0 – 10 |
| M10 Through Hole Dia. | 11 mm | 5 – 25 |
| M10 Counterbore Dia. | 17 mm | 10 – 30 |
| M10 Counterbore Depth | 6 mm | 0 – 15 |
| Clamp Hole Offset from Long Edge | 20 mm | 5 – 60 |
| Clamp Hole Offset from Ends | 40 mm | 5 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu