Everything else
RoboFut 4WD N20 Chassis
- Bounding box
- 64 × 86 × 23.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
robofut que tenga el espacio para 4 llantas y del tamaño de motores n20
Parameters
| Name | Value | Range |
|---|---|---|
| Width across X | 64 mm | 40 – 120 |
| Length along Y | 86 mm | 50 – 160 |
| Base plate thickness | 6 mm | 3 – 12 |
| Corner radius | 10 mm | 2 – 25 |
| Motor body length | 24 mm | 18 – 32 |
| Motor body width Y | 12 mm | 10 – 16 |
| Motor body height Z | 10 mm | 8 – 14 |
| Clearance around motor | 0.4 mm | 0.2 – 1 |
| Clamp wall thickness | 3 mm | 2 – 6 |
| Clamp length along X | 8 mm | 4 – 14 |
| Zip-tie slot width | 3 mm | 2 – 5 |
| Wheel diameter | 30 mm | 24 – 50 |
| Wheel width | 8 mm | 4 – 16 |
| Gap between motor face and wheel | 1.5 mm | 0.5 – 5 |
| Wheel overlap into chassis side | 4 mm | 0 – 10 |
| Front/rear axle spacing | 54 mm | 30 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm