Robofut 4WD N20 Chassis

1 views

Bounding box: 106 × 97.8 × 42 mm
Engine: 3D Printing B-rep
Parameters: 24
Published: November 6, 2026

Download

Free to download and use. See the terms.

The prompt

crea un diceño para robofut con 4 llantas con las medidas para poner un motor n20

Parameters

Name	Value	Range
Chassis length, X	90 mm	50 – 160
Chassis width, Y	70 mm	50 – 160
Deck and bracket wall thickness	3 mm	2 – 6
Deck corner radius	8 mm	2 – 20
Gap between motor top and deck underside	1 mm	0 – 6
N20 gearbox height	10 mm	8 – 16
M2 fixing hole spacing	12 mm	8 – 20
M2 clearance hole diameter	2.2 mm	1.6 – 4
Shaft boss clearance hole	7 mm	5 – 12
Motor bracket length in X	26 mm	16 – 40
Bracket height below the axle	15 mm	6 – 30
PCB mounting hole, M3	3.4 mm	2.5 – 6
PCB hole spacing X	40 mm	10 – 80
PCB hole spacing Y	30 mm	10 – 80
Wheel outer diameter	42 mm	20 – 80
Wheel width	14 mm	6 – 30
Tyre ring radial thickness	4 mm	2 – 10
Hub diameter	16 mm	8 – 30
Number of spokes	5 mm	3 – 8
Spoke width	4 mm	2 – 10
Number of tread notches	12 mm	0 – 24
Tread notch depth	1.5 mm	0.5 – 3
Motor shaft diameter	3 mm	2 – 6
Axis to D-flat distance	1 mm	0.5 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS