Loading the interactive model…
Interactive 3D model of Roaring Lion Face with 3D DomeEverything else
Roaring Lion Face with 3D Dome
1 views
- Bounding box
- 92.0 × 86.6 × 66.3 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- October 9, 2026
Download
Free to download and use. See the terms.
The prompt
like 3d face not flat
Parameters
| Name | Value | Range |
|---|---|---|
| Face plate thickness | 4 mm | 1 – 10 |
| Face plate diameter | 60 mm | 30 – 120 |
| Central dome height | 8 mm | 1 – 20 |
| Mane petal count (outer ring) | 12 | 4 – 24 |
| Outer mane ring diameter | 80 mm | 50 – 150 |
| Outer mane petal diameter | 12 mm | 6 – 25 |
| Inner mane ring diameter | 65 mm | 40 – 120 |
| Inner mane petal diameter | 10 mm | 5 – 20 |
| Ear X offset (from center) | 18 mm | 5 – 40 |
| Ear Y offset (from center) | 20 mm | 5 – 50 |
| Ear diameter | 15 mm | 5 – 30 |
| Muzzle center Y offset (from center) | -10 mm | -40 – 20 |
| Muzzle boss diameter | 16 mm | 6 – 30 |
| Muzzle boss height (above original flat face) | 10 mm | 2 – 25 |
| Nose center Y offset (from center) | -10 mm | -40 – 20 |
| Nose boss diameter | 8 mm | 3 – 15 |
| Nose boss height (above muzzle top) | 6 mm | 1 – 15 |
| Nose top edge fillet radius | 1 mm | 0 – 3 |
| Eye X offset (from center) | 10 mm | 2 – 20 |
| Eye Y offset (from center) | 15 mm | 5 – 40 |
| Eye boss diameter | 8 mm | 3 – 15 |
| Eye boss height (above original flat face) | 4 mm | 1 – 10 |
| Pupil pocket diameter | 3 mm | 1 – 6 |
| Pupil pocket depth | 2 mm | 0.5 – 5 |
| Mouth opening width | 20 mm | 5 – 40 |
| Mouth top edge Y | -25 mm | -50 – -5 |
| Mouth bottom vertex Y | -40 mm | -60 – -10 |
| Fang width (base) | 2 mm | 1 – 6 |
| Fang X offset from center | 6 mm | 0 – 15 |
| Fang length (vertical) | 8 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
STEPSTLGLB22 PARAMS
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
STEPSTLGLB20 PARAMS
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
STEPSTLGLB4 PARAMS