Brackets and mounts
Right-Angle Split Tube Clamp
- Bounding box
- 80.0 × 52.0 × 96.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 4, 2026
Download
Free to download and use. See the terms.
The prompt
Right-angle 90-degree clamp-type coupling piece consisting of an elongated body with rounded ends featuring two perpendicularly intersecting cylindrical bores, the main longitudinal through-bore having a diameter of 28 millimeters for the central tube to pass through; it includes a continuous slit running parallel to the main bore that enables compressive deformation, and instead of screws it has two diagonally arranged fastening holes crossing the slit on both sides—one located in the upper right area and the other in the lower left area—oriented perpendicular to the slit so that when fasteners are inserted, the slit closes and applies uniform clamping pressure to both tubes, creating a secure tight fit without requiring adhesive, welding, or threading on the smooth internal bore surfaces.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length (main tube axis) | 80 mm | 70 – 120 |
| Body Width | 52 mm | 40 – 60 |
| Body Height | 48 mm | 40 – 60 |
| Main Bore Diameter | 28 mm | 16 – 34 |
| Second Bore Diameter | 28 mm | 16 – 34 |
| Slit Width | 1.6 mm | 0.8 – 3 |
| Slit Depth from Front | 20 mm | 12 – 26 |
| Fastener Hole Diameter | 5.5 mm | 3 – 7 |
| Fastener X Offset | 25 mm | 12 – 40 |
| Right Fastener Front Offset | 5 mm | 3 – 12 |
| Left Fastener Front Offset | 7.5 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent