RI-8514 Axial-Flux Stator (Spoked Core + Magnet Ring)

1 views

Bounding box: 85.2 × 85.2 × 24.0 mm
Engine: Precision B-rep
Parameters: 14
Published: September 30, 2026

Download

Free to download and use. See the terms.

The prompt

generate a stator based on the following dimensions: RI-8514 ‑ Stator outer diameter: φ85.2 mm ‑ Coil wire‑out side height: 6 mm ‑ Non‑wire‑out side height: 4 mm ‑ Total stator height: 24 mm ‑ Rotor inner diameter: φ52 mm ‑ Rotor height: 16 mm. This should take the shape of a wide and flat cylinder. Not that it is a cylinder but you know what I mean. The stator should look like a ring of rectangular magnets on the outter diameter and the inner part should look kinda like a wagon wheel with flat weight cut spokes.

Parameters

Name	Value	Range
Core Outer Diameter	80 mm	60 – 110
Rim Inner Diameter	70 mm	50 – 100
Hub Outer Diameter	58 mm	30 – 90
Bore (Rotor) Diameter	52 mm	10 – 80
Total Stator Height	24 mm	10 – 40
Coil Wire-Out Side Height	6 mm	0 – 12
Non Wire-Out Side Height	4 mm	0 – 12
Spoke Count	6 off	3 – 12
Spoke Width	8 mm	3 – 20
Magnet Ring Outer Diameter	85.2 mm	60 – 120
Magnet Count	16 off	4 – 36
Magnet Width (tangential)	10 mm	3 – 25
Magnet Thickness (radial)	5 mm	1 – 15
Magnet Height (axial)	24 mm	5 – 40

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS