Everything else
Retractable Tensile Canopy Assembly
- Bounding box
- 27750.0 × 13515.8 × 1590.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a professional architectural and engineering CAD design for a large outdoor retractable tensile canopy / awning system for RED HOUSE GROUP. PROJECT TYPE: Commercial outdoor shading canopy / retractable tensile awning system installed above the windows of an existing building. OVERALL PROJECT DIMENSIONS: Overall length: 27.50 meters Overall projection/depth: 13.45 meters Total area: approximately 369.875 square meters MODULE CONFIGURATION: Divide the complete 27.50 m length into exactly 5 equal canopy modules. Each module: Width: 5.50 meters Projection/depth: 13.45 meters Therefore: 5 modules × 5.50 m = 27.50 m total length. Each module must be clearly separated structurally while creating one continuous professional canopy system. INSTALLATION: The canopy must be installed ABOVE the existing building windows, attached to the building facade / structural wall. The front edge must be supported by a suitable steel structural frame. Show the connection points between the canopy structure and the existing building. Do NOT place the main supporting structure on the ground unless structurally necessary. ROOF / FABRIC: Use a high-quality tensile PVC-coated fabric membrane suitable for outdoor architectural shading. The membrane should be professionally tensioned. Show realistic fabric tension and clean straight edges. Use a modern premium architectural appearance. DRAINAGE: The complete canopy must have a controlled slope toward the designated drainage side. Provide approximately 1.00 meter vertical level difference / slope for rainwater drainage. The slope must be clearly visible in the side elevation and 3D model. Show the direction of rainwater flow with arrows. Design the front and side edges so rain
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 27500 mm | 1000 – 40000 |
| Overall Projection / Depth | 13450 mm | 3000 – 20000 |
| Front Drainage Drop | 1000 mm | 100 – 2000 |
| Module Width | 5500 mm | 1000 – 10000 |
| Number of Modules | 5 mm | 1 – 10 |
| Rear Beam Length | 27500 mm | 1000 – 40000 |
| Rear Beam Width | 150 mm | 50 – 400 |
| Rear Beam Height | 200 mm | 50 – 500 |
| Front Beam Length | 27500 mm | 1000 – 40000 |
| Front Beam Width | 300 mm | 100 – 600 |
| Front Beam Height | 400 mm | 100 – 800 |
| Number of Rafters | 5 mm | 1 – 12 |
| Rafter Width | 200 mm | 50 – 500 |
| Rafter Height | 350 mm | 50 – 600 |
| Tie Rod Diameter | 100 mm | 20 – 300 |
| Tie Rod Length | 6000 mm | 1000 – 12000 |
| Drive Unit Length | 350 mm | 100 – 1000 |
| Drive Unit Width | 200 mm | 50 – 600 |
| Drive Unit Height | 150 mm | 50 – 500 |
| Fabric Membrane Thickness | 10 mm | 1 – 50 |
| Gutter Length | 27500 mm | 1000 – 40000 |
| Gutter Width | 120 mm | 50 – 400 |
| Gutter Height | 150 mm | 50 – 400 |
| Bracket Length | 250 mm | 100 – 1000 |
| Bracket Thickness | 10 mm | 2 – 60 |
| Bracket Height | 150 mm | 50 – 500 |
| Bracket Count | 6 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like