Reservoir with Front Slots - Lower Slot Inner Fillet

1 views

Bounding box: 120.0 × 70.0 × 180.0 mm
Engine: Precision B-rep
Parameters: 14
Published: November 2, 2026

Download

Free to download and use. See the terms.

The prompt

Modify the current model only. Keep all existing geometry unchanged. On the LOWER front slot only, add a fillet to the INNER LOWER EDGE. Target edge: - lower slot - inner face at Y = 3 mm - lower edge at Z = 130.1 mm Fillet radius = 1.5 mm. Apply the fillet continuously along the complete lower slot edge, including the rounded ends. Keep the external slot opening unchanged: - width 103 mm - height 3.8 mm - center X = 60 mm - center Z = 132 mm Do not modify the upper slot. Do not modify the reservoir dimensions. Do not add any other feature.

Parameters

Name	Value	Range
Length (X)	120 mm	20 – 400
Base Depth (Y)	20 mm	1 – 200
Knee Depth (Y)	22 mm	1 – 250
Knee Height (Z)	100 mm	5 – 400
Top Depth (Y)	70 mm	2 – 400
Top Height (Z)	180 mm	10 – 600
Wall Thickness	3 mm	0.5 – 30
Cavity Floor Height	4 mm	0.5 – 200
Slot Length (X)	103 mm	5 – 380
Slot Height (Z)	3.8 mm	0.5 – 50
Slot Centre X	60 mm	0 – 400
Lower Slot Centre Z	132 mm	1 – 600
Upper Slot Centre Z	148 mm	1 – 600
Lower Slot Inner Edge Fillet	1.5 mm	0.2 – 1.7

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS