Everything else
Reservoir Shell w/ Lower-Slot Inner Fillet
- Bounding box
- 120.0 × 70.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the current model only. Keep all existing geometry unchanged. On the LOWER front slot only, add a fillet to the INNER LOWER EDGE. Target edge: - lower slot - inner face at Y = 3 mm - lower edge at Z = 130.1 mm Fillet radius = 1.5 mm. Apply the fillet continuously along the complete lower slot edge, including the rounded ends. Keep the external slot opening unchanged: - width 103 mm - height 3.8 mm - center X = 60 mm - center Z = 132 mm Do not modify the upper slot. Do not modify the reservoir dimensions. Do not add any other feature.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer P0 Y | 0 mm | -50 – 200 |
| Outer P0 Z | 0 mm | -50 – 400 |
| Outer P1 Y | 20 mm | -50 – 200 |
| Outer P1 Z | 0 mm | -50 – 400 |
| Outer P2 Y | 22 mm | -50 – 200 |
| Outer P2 Z | 100 mm | -50 – 400 |
| Outer P3 Y | 70 mm | -50 – 300 |
| Outer P3 Z | 180 mm | -50 – 400 |
| Outer P4 Y | 0 mm | -50 – 300 |
| Outer P4 Z | 180 mm | -50 – 400 |
| Outer Length (X) | 120 mm | 10 – 500 |
| Inner P0 Y | 3 mm | -50 – 200 |
| Inner P0 Z | 4 mm | -50 – 400 |
| Inner P1 Y | 17.08 mm | -50 – 200 |
| Inner P1 Z | 4 mm | -50 – 400 |
| Inner P2 Y | 19 mm | -50 – 200 |
| Inner P2 Z | 100 mm | -50 – 400 |
| Inner P3 Y | 67 mm | -50 – 300 |
| Inner P3 Z | 180 mm | -50 – 400 |
| Inner P4 Y | 3 mm | -50 – 300 |
| Inner P4 Z | 180 mm | -50 – 400 |
| Cavity Start X | 3 mm | 0 – 200 |
| Cavity End X | 117 mm | 5 – 500 |
| Slot Width | 103 mm | 5 – 200 |
| Slot Height | 3.8 mm | 0.5 – 50 |
| Slot End Radius | 1.9 mm | 0.1 – 25 |
| Slot Centre X | 60 mm | 0 – 300 |
| Lower Slot Centre Z | 132 mm | 5 – 400 |
| Upper Slot Centre Z | 148 mm | 5 – 400 |
| Wall Front Face Y | 0 mm | -10 – 100 |
| Wall Inner Face Y | 3 mm | 0.5 – 100 |
| Lower Slot Inner Fillet R | 1.5 mm | 0.1 – 1.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm