Gears and transmission
Renault Trafic L1H1 Panel Van (1:32)
- Bounding box
- 158.8 × 119.2 × 67.1 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- October 1, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 1:32 scale Renault Trafic L1H1 panel van as a precise parametric CAD model. Body: 158.8 × 61.1 × 61.6 mm, wheelbase 96.8 mm. Accurately model the recognizable Renault Trafic shape: sloped bonnet, angled windshield, curved roof, realistic front fascia, headlights, grille, front doors, sliding side door, integrated wheel arches and twin rear doors. Use realistic automotive proportions, not a generic box van. Create separate body, chassis, 4 wheels, 2 axles and roof rack. Optimize for FDM printing with a 0.4 mm nozzle. No logos or text.
Parameters
| Name | Value | Range |
|---|---|---|
| Body length | 158.8 mm | 120 – 200 |
| Body width | 61.1 mm | 50 – 80 |
| Body height | 61.6 mm | 50 – 80 |
| Wheelbase | 96.8 mm | 80 – 120 |
| Front overhang | 35 mm | 20 – 50 |
| Wheel diameter | 21 mm | 15 – 28 |
| Wheel width | 7 mm | 4 – 12 |
| Axle diameter | 2.4 mm | 1.5 – 4 |
| Chassis thickness | 2.5 mm | 1.5 – 5 |
| Body floor height | 6 mm | 3 – 12 |
| Wheel arch clearance | 2.5 mm | 1 – 5 |
| Wheel arch cut depth | 12 mm | 6 – 20 |
| Side panel line depth | 0.5 mm | 0.3 – 1.2 |
| Roof rack height | 5 mm | 3 – 10 |
| Roof rack rail width | 4 mm | 2 – 8 |
| Roof rack rail spacing | 20 mm | 10 – 40 |
| Fillet radius | 0.8 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled