Brackets and mounts
Refillable Desiccant Puck
- Bounding box
- 55.0 × 55.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 27, 2026
Download
Free to download and use. See the terms.
The prompt
Create a two-piece refillable cylindrical desiccant puck for FDM 3D printing. Overall assembled dimensions: - Outside diameter: 55 mm - Maximum thickness: 20 mm - Capacity: approximately 25–30 g silica gel beads Body: - Hollow cylindrical body - 2 mm nominal wall thickness - Smooth cylindrical outer perimeter - Strongly rounded exterior edges and fillets Lid: - Removable screw-on lid - Use practical FDM thread clearance - Keep the threaded connection inside the outer cylindrical envelope - No exposed threads or protruding features Ventilation: - 1.5 mm diameter ventilation holes - Distribute holes across both large circular faces - No ventilation holes in the cylindrical perimeter - Leave a solid perimeter around the hole pattern for strength Exterior safety: - No sharp exterior corners or edges - No knurling - No clips - No tabs - No protrusions - Exterior surfaces should be smooth and rounded The assembled container will be stored loose inside a thin polyethylene Ziploc bag. Minimize any feature that could snag, abrade, or puncture the bag. Design the body and lid to print flat on an FDM printer without supports if practical.
Parameters
| Name | Value | Range |
|---|---|---|
| Body outer diameter | 55 mm | 40 – 80 |
| Body outer height | 16 mm | 10 – 20 |
| Body wall thickness | 2 mm | 1.2 – 4 |
| Bottom thickness | 2 mm | 1 – 4 |
| Lid top thickness | 4 mm | 2 – 8 |
| Lid skirt height | 5 mm | 4 – 12 |
| Lid skirt wall thickness | 1.5 mm | 1.2 – 4 |
| Lid-to-body radial clearance | 0.4 mm | 0.1 – 1 |
| Vent hole diameter | 1.5 mm | 1 – 3 |
| Vent hole bolt-circle radius | 17 mm | 10 – 22 |
| Vent holes per face | 8 count | 4 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent