Brackets and mounts
Rectangular Tunnel with Deflectors and Tabs
- Bounding box
- 199.6 × 150.0 × 100.5 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a hollow rectangular tunnel open on both the front face and back face. Overall dimensions: 200 mm wide, 150 mm tall, 100 mm deep (front to back). Wall thickness: 4 mm on all sides, creating a completely open pass-through channel from front to back. Inside the tunnel, attach two thin internal deflector plates (4 mm thick) angled at 25 degrees extending from the inner walls into the water flow path. On the exterior left and right side walls, add small 3 mm wedge-shaped mounting tabs for snap-fitting. Ensure the model is a single watertight STL geometry.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 200 mm | 150 – 300 |
| Overall height | 150 mm | 100 – 300 |
| Overall depth | 100 mm | 50 – 200 |
| Wall thickness | 4 mm | 2 – 10 |
| Deflector angle | 25 deg | 10 – 45 |
| Deflector plate length | 30 mm | 10 – 60 |
| Tab protrusion length | 5 mm | 2 – 10 |
| Tab vertical height | 10 mm | 4 – 20 |
| Tab depth (along Z) | 3 mm | 1 – 5 |
| Drain hole diameter | 2 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent