Rectangular Mug with Arm Handle and Backpack Relief

1 views

Bounding box: 145.0 × 105.0 × 100.0 mm
Engine: Precision B-rep
Parameters: 14
Published: October 28, 2026

Download

Free to download and use. See the terms.

The prompt

我要製作一個要型杯子，杯子的長度寬度是10乘10cm，杯壁厚度0.2cm，然後我給你的片她上面的裝飾都幫我凸出，但是不用凸出很多，大概凸出0.2~0.3cm，然後我給你正面還有背面的圖片，他手把的部分是不規則手臂的形狀，手把那邊跟杯體的接合處要做好，不然會斷掉，手把的部分也要做厚一點稍微粗一點，不然拿的時候會斷掉，我給你的照片，上面是杯子正面的圖片，下面是杯子背面的圖片，他背面是一個背包

Parameters

Name	Value	Range
Outer Length (X)	100 mm	60 – 160
Outer Width (Y)	100 mm	60 – 160
Height (Z)	100 mm	60 – 180
Wall Thickness	2 mm	1 – 6
Bottom Thickness	2 mm	1 – 6
Decoration Protrusion	2.5 mm	1.5 – 3.5
Handle Thickness (Y)	18 mm	10 – 30
Handle Protrusion (X)	45 mm	25 – 70
Handle Top Attach Z	82 mm	50 – 95
Handle Bottom Attach Z	18 mm	5 – 45
Backpack Width	50 mm	30 – 80
Backpack Height	60 mm	30 – 90
Backpack Z Offset	15 mm	0 – 40
Front Emblem Diameter	30 mm	10 – 60

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS