Brackets and mounts
Rectangular enclosure with display cutouts
- Bounding box
- 120.0 × 80.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Design a hollow, one-piece rectangular enclosure with 3mm thick walls and floor. Add internal standoffs for mounting an ESP32 board. On the top face, create two recessed cutouts: one measuring 60 × 45 mm for a 2.4-inch display, and one measuring 30 × 20 mm for a 1.14-inch display. Add ventilation slots on the side and a circular cutout on the right side for a USB cable."
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 120 mm | 80 – 200 |
| Enclosure Width | 80 mm | 60 – 150 |
| Enclosure Height | 30 mm | 20 – 60 |
| Wall Thickness | 3 mm | 2 – 5 |
| Large Display Cutout Length | 60 mm | 40 – 100 |
| Large Display Cutout Width | 45 mm | 30 – 80 |
| Large Display Cutout Depth | 2 mm | 1 – 2.5 |
| Small Display Cutout Length | 30 mm | 20 – 60 |
| Small Display Cutout Width | 20 mm | 15 – 40 |
| Small Display Cutout Depth | 2 mm | 1 – 2.5 |
| Standoff Height | 5 mm | 3 – 15 |
| Standoff Diameter | 6 mm | 4 – 10 |
| USB Cutout Diameter | 12 mm | 8 – 20 |
| USB Cutout Height from Floor | 15 mm | 5 – 25 |
| Ventilation Slot Count | 4 | 2 – 8 |
| Ventilation Slot Length | 20 mm | 10 – 40 |
| Ventilation Slot Width | 2 mm | 1 – 5 |
| Ventilation Slot Depth | 1.5 mm | 0.5 – 2.5 |
| Ventilation Slot Spacing | 8 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent