Brackets and mounts
Rectangular Enclosure Box with Dividers
- Bounding box
- 140.0 × 100.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular industrial electronics enclosure box measuring 140 mm long, 100 mm wide, and 60 mm deep with a wall thickness of 3 mm. Add a central interior dividing wall to separate a 12V battery compartment from the electronics. On the front face, include a precise rectangular cutout measuring 50 mm by 80 mm to mount a 2.8 inch TFT LCD display screen. On the left side panel, add a circular cutout with a 12 mm diameter for a water level float switch, and another 16 mm circular cutout for a main power toggle switch. On the bottom panel, include four slotted ventilation grilles measuring 3 mm wide and 20 mm long to allow ambient airflow to reach an internal DHT22 sensor, and two 6 mm circular holes for water pump and power cable routing. Add four internal M3 screw mounting bosses at the interior base corners to secure a circuit board.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 140 mm | 100 – 200 |
| Width | 100 mm | 80 – 150 |
| Depth | 60 mm | 40 – 100 |
| Wall Thickness | 3 mm | 1 – 5 |
| Dividing Wall Position from Left | 40 mm | 6 – 134 |
| Dividing Wall Thickness | 3 mm | 1 – 5 |
| LCD Cutout Width | 50 mm | 20 – 90 |
| LCD Cutout Height | 80 mm | 20 – 130 |
| LCD Center X (front face) | 70 mm | 25 – 115 |
| LCD Center Z (front face) | 30 mm | 10 – 50 |
| Float Switch Diameter | 12 mm | 5 – 25 |
| Float Switch Y Position (left face) | 25 mm | 5 – 95 |
| Float Switch Z Position (left face) | 30 mm | 5 – 55 |
| Power Switch Diameter | 16 mm | 5 – 30 |
| Power Switch Y Position (left face) | 75 mm | 5 – 95 |
| Power Switch Z Position (left face) | 30 mm | 5 – 55 |
| Number of Vent Slots | 4 | 1 – 10 |
| Vent Slot Length (along X) | 20 mm | 10 – 50 |
| Vent Slot Width (along Y) | 3 mm | 1 – 10 |
| Vent Slot Spacing (center to center) | 12 mm | 5 – 40 |
| Vent Slot Center X (along length) | 70 mm | 20 – 120 |
| Cable Hole Diameter | 6 mm | 4 – 20 |
| Cable Hole 1 X Position | 10 mm | 5 – 130 |
| Cable Hole 1 Y Position | 90 mm | 5 – 95 |
| Cable Hole 2 X Position | 130 mm | 5 – 135 |
| Cable Hole 2 Y Position | 90 mm | 5 – 95 |
| Boss Outer Diameter | 5 mm | 4 – 10 |
| Boss Inner Diameter (hole) | 2.5 mm | 2 – 5 |
| Boss Height | 5 mm | 3 – 10 |
| Boss Clearance from Inner Wall | 5 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent