Brackets and mounts
Rectangular Enclosure Base (Socle)
- Bounding box
- 200.0 × 200.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
A rectangular enclosure base (socle) 200mm x 200mm x 15mm, wall and floor thickness 3 On the inner floor, add 4 cylindrical mounting posts for an Arduino Uno board, 3.2mm Add a rectangular cutout on the back wall, 12mm wide x 15mm tall, aligned 5mm from th On the right side of the floor, add two facing clip rails (2mm thick, 5mm tall vertic In the front-center area, add a rectangular pocket 24mm x 13mm x 30mm deep for a micr Around the entire inner perimeter at the top edge, add a continuous groove (rainure) All edges lightly chamfered 0.5mm. Units in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer X | 200 mm | 50 – 500 |
| Outer Y | 200 mm | 50 – 500 |
| Total Height | 15 mm | 5 – 100 |
| Wall Thickness | 3 mm | 1 – 10 |
| Floor Thickness | 3 mm | 1 – 10 |
| Post Outer Diameter | 6 mm | 2 – 20 |
| Post Hole Diameter | 3.2 mm | 1 – 10 |
| Post Height | 5 mm | 1 – 20 |
| Post Spacing X | 60 mm | 10 – 150 |
| Post Spacing Y | 45 mm | 10 – 150 |
| Back Cutout Width | 12 mm | 1 – 50 |
| Back Cutout Height | 5 mm | 1 – 7 |
| Back Cutout Top Offset | 5 mm | 1 – 10 |
| Rail Thickness | 2 mm | 0.5 – 5 |
| Rail Height | 5 mm | 1 – 10 |
| Rail Gap | 2 mm | 0.5 – 10 |
| Rail Length | 80 mm | 10 – 150 |
| Pocket Width | 24 mm | 5 – 100 |
| Pocket Length | 13 mm | 5 – 100 |
| Pocket Depth | 3 mm | 0.5 – 3 |
| Groove Width | 1.5 mm | 0.5 – 3 |
| Groove Depth | 2 mm | 0.5 – 5 |
| Chamfer Size | 0.5 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu