Loading the interactive model…
Interactive 3D model of Rear-Mounted Handlebar Display EnclosureEverything else
Rear-Mounted Handlebar Display Enclosure
6 views
- Bounding box
- 90.0 × 80.6 × 80.6 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 16, 2026
Download
Free to download and use. See the terms.
The prompt
Siirrätkö kiinnityksen näyttökotelon taakse
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Width | 90 mm | 50 – 150 |
| Enclosure Height | 60 mm | 40 – 100 |
| Rear Housing Depth | 35 mm | 20 – 70 |
| Front Wall Thickness | 4 mm | 2 – 8 |
| Housing Wall Thickness | 3 mm | 1.5 – 6 |
| Display Cutout Width | 60 mm | 20 – 120 |
| Display Cutout Height | 35 mm | 15 – 80 |
| Screw Boss Diameter | 8 mm | 4 – 12 |
| Screw Hole Diameter | 3.2 mm | 2 – 6 |
| Cable Gland Hole Diameter | 10 mm | 5 – 20 |
| Clamp Mount Width | 50 mm | 30 – 100 |
| Clamp Mount Height | 40 mm | 25 – 80 |
| Clamp Mount Depth | 25 mm | 12 – 50 |
| Handlebar Diameter | 22.2 mm | 15 – 35 |
| Clamp Bottom Wall | 10 mm | 4 – 20 |
| Clamp Slot Width | 2.5 mm | 1 – 6 |
| Clamp Screw Diameter | 5 mm | 3 – 8 |
| Clamp Screw Spacing | 36 mm | 15 – 70 |
| Display Tilt Angle | 45 deg | 0 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS