Rear Hardtail Swingarm with Engine Hanger

3 views

Bounding box: 220.0 × 491.0 × 90.0 mm
Engine: Precision B-rep
Parameters: 19
Published: October 27, 2026

Download

Free to download and use. See the terms.

The prompt

我想要做一個前面爽A臂後面像摩托車引擎吊架的硬軸搖臂設計

Parameters

Name	Value	Range
Pivot Tube OD	40 mm	24 – 60
Pivot Tube ID	20 mm	8 – 28
Pivot Tube Length	220 mm	200 – 320
Arm Length (Pivot to Axle)	450 mm	350 – 700
Arm Width	25 mm	15 – 40
Arm Height	35 mm	20 – 60
Arm Center Offset	80 mm	45 – 90
Axle Tube OD	42 mm	24 – 60
Axle Tube ID	20 mm	8 – 28
Axle Tube Length	220 mm	200 – 320
Engine Mount Y Position	260 mm	100 – 300
Engine Plate Height	90 mm	40 – 140
Engine Plate Thickness	8 mm	4 – 16
Engine Mount Hole Dia	10 mm	5 – 18
Engine Hole Spacing	70 mm	30 – 90
Engine Hole Z Offset	0 mm	-20 – 20
Cross Brace Y Position	150 mm	60 – 300
Cross Brace Height	25 mm	10 – 50
Cross Brace Thickness	12 mm	5 – 25

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS